lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-09-2015, 10:41 AM   #1
waf8607
Not Yet Wild
 
Join Date: Oct 2013
Posts: 10
Default how to remove CC precedent SAM

I cannot remove the SAM (Structural Accessory Module) on my 2004 Precedent. I have removed all bolts but on the inside of the bucket there are 2 bolts on each side. The 2 bottoms I can get out fine but the 2 top ones just spin when I am trying to remove them. I am guessing there is a nut on the other side but I can't get to it with the SAM on. Anybody have any ideas. I am doing this because I want to remove my rear body and have to remove the SAM in order to do so. Thank you.
waf8607 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-09-2015, 11:16 AM   #2
rib33024
......................
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
Default Re: how to remove CC precedent SAM

Page 1-18 show the SAMs your talking about


http://mobilicab.com/pdf/2009-2011-Precedent.pdf
rib33024 is offline   Reply With Quote
Old 01-09-2015, 01:33 PM   #3
TahoeDawgZ71
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
Default Re: how to remove CC precedent SAM

The early model SAM such as yours uses a metal nut inside the rear canopy support. The bolts thread into it and it keeps the support from coming out. The internal nut often breaks loose when you try to remove them and does nothing but spin. The only way to get it apart is to break it. They've changed the design since then and eliminated the internal nut. New models use a bolt with very coarse threads. It looks almost like a corkscrew and actually threads into the plastic canopy brace without the use of a metal nut. Unfortunately for you, you have the earlier style.
TahoeDawgZ71 is offline   Reply With Quote
Old 01-09-2015, 01:55 PM   #4
waf8607
Not Yet Wild
 
Join Date: Oct 2013
Posts: 10
Default Re: how to remove CC precedent SAM

That was exactly the answer I was looking for TahoeDawgZ71... I figured it was something like that, I just thought it was odd that it happened to both sides and just the top 2. Anyways.....out of frustration I did end up lifting up on it and broke the bracket that bolts to the cart frame. With that side completely loose, I was able to lift both sides up enough to get the body out so I can paint it. Do you know what year this design was changed in?
waf8607 is offline   Reply With Quote
Old 01-11-2015, 05:20 PM   #5
TahoeDawgZ71
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
Default Re: how to remove CC precedent SAM

I believe it was 2006
TahoeDawgZ71 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
How to remove CC Precedent body? Electric Club Car
Remove DCS??? Electric EZGO
How do I remove these? Gas EZGO
How to remove this? Gas Yamaha
How to remove the Electric EZGO


All times are GMT -5. The time now is 07:26 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.