|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-01-2012, 11:41 AM | #11 |
Not Yet Wild
Join Date: Jul 2011
Posts: 28
|
Re: 03 CC Pathway wont do anything
Should I try jumping the solenoid at this point? or do I have bigger problems.....?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2012, 11:52 AM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,411
|
Re: 03 CC Pathway wont do anything
You can jump the solenoid or just connect both large cables to one Post, that will bypass the solenoid.
Lets go back to the orig. problem Boy runs down mailbox, cart won't work. 2003 CC has a throttle input device (MCOR) mounted under the floor on the passenger side... take a good hard look at what might have happened to the MCOR, the linkage, the wires and anything else associated with the throttle signal sender. |
11-01-2012, 12:54 PM | #13 |
Not Yet Wild
Join Date: Jul 2011
Posts: 28
|
Re: 03 CC Pathway wont do anything
Ok I agree I've been up under it and everything looks fine nothing seems to be scratched or busted or cracked on the MCOR whats the next step? test it with a multi meter?
|
11-01-2012, 01:01 PM | #14 |
Not Yet Wild
Join Date: Jul 2011
Posts: 28
|
Re: 03 CC Pathway wont do anything
Would the same test procedures that you would do to check the MCOR, Solenoid, etc.etc. on a 05 precedent work on this 03 Pathway?
|
11-05-2012, 12:34 PM | #15 |
Not Yet Wild
Join Date: Jul 2011
Posts: 28
|
Re: 03 CC Pathway wont do anything
Hello??? Even with the cart key switched off and tow switch set to TOW and F/R set to Nutral theres still 50v on the green and white wire at the controller as well as 50v on both large posts of solenoid is that normal??? if not what would cause this?
|
11-05-2012, 02:57 PM | #16 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 03 CC Pathway wont do anything
i don,t think i read everything but have you tested the controller? if cart was towed or pushed without the run tow switch being in tow theres a good chance you they damaged controller......if you covered this already sorry......................
|
11-06-2012, 02:26 PM | #17 |
Not Yet Wild
Join Date: Jul 2011
Posts: 28
|
Re: 03 CC Pathway wont do anything
Nah man don't be sorry thx for responding any ideas or suggestions at this point is good thing! I've read so much info that now i know enough to confuse myself is there a way to test components separately ( taken off the cart and bench tested maybe???) just seems that would be easier at this point but haven't found any info on doing such...if not whats the best way to go about testing the controller on an 03 IQ car its a Curtis 1510-5201? does it have an led under the make/model label like ive been reading about? i feel the indention but haven't seen it light up yet and really didnt want to peel off the label? and most of the wiring diagrams and bypass info I found is for other carts like 05 precedents and such and the wire colors are always diff? not sure if I'm running tests correctly?....BrEaKtImE!
|
11-06-2012, 02:35 PM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,411
|
Re: 03 CC Pathway wont do anything
The LED light you have been reading about is on the Alltrax controls.
There are tests for the controller but you need to keep it in the system to test. Does the solenoid click when you press the gas? |
11-06-2012, 03:16 PM | #19 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,411
|
Re: 03 CC Pathway wont do anything
Give the battery pack voltage reading for reference.
With the cart on jacks for safety..... Key on & cart in gear. Put your test leads on B+ and B- of the controller. press the gas . should read full pack voltage. Now put the test leads on B- and M-. should get full pack voltage when the solenoid just clicks then voltage reading should drop as the peddle is pressed. |
11-06-2012, 03:48 PM | #20 |
Not Yet Wild
Join Date: Jul 2011
Posts: 28
|
Re: 03 CC Pathway wont do anything
Pack Voltage = 50.1v
B+ and B- of controller = 49.5v regardless of pedal movement B- and M- = stays at 49.5v regardless of pedal movement Solenoid = Does not click |
Tags |
48v meter, cc iq, clubcar pathway |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lifting a Pathway? | Electric Club Car | |||
Pathway Wiring | Electric Club Car | |||
Pathway same as DS? | Electric Club Car | |||
2003 Pathway Value? | Electric Club Car |