|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-26-2019, 08:32 AM
|
#1 |
|
Not Yet Wild
 Join Date: Jul 2019
Location: South Carolina
Posts: 36
|
Riot Kit Install, Resuming Restoration
Installed Plowmans Riot Kit yesterday, total time was approximately 4.5 hours without help (I now know I can bench press at least 68 lbs
 ) SO, the cart now runs. Unknown top speed as I am abiding by the recommended motor break-in process. To those who recommended Plowmans, thank you. His customer service is of an unmatched quality. Seriously.Next on the list is replacing the existing Jakes Lift kit, as rust and deterioration are common on all associated components. My question is (and forgive my lack of knowledge), is there a simple way to determine whether the existing kit is 3" or 6"? Most of the photos and other thread I've compared are inconclusive. Thanks!! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-26-2019, 11:11 AM
|
#2 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Riot Kit Install, Resuming Restoration
A quick picture of the old lift kit would help us tell. Great upgrades by the way!
|
|
|
|
|
08-27-2019, 06:37 AM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2019
Location: South Carolina
Posts: 36
|
Re: Riot Kit Install, Resuming Restoration
Thanks Luke. Had some time to take some photos yesterday afternoon.
|
|
|
|
|
08-27-2019, 06:40 AM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2019
Location: South Carolina
Posts: 36
|
Re: Riot Kit Install, Resuming Restoration
You can see why I'd like to replace... the bolt on the upper-right side of the triangular bracket is either welded (?) or completely locked up with rust. I had to break the top of this bolt in order to remove rear seat for access during motor replacement.
|
|
|
|
|
08-29-2019, 09:22 AM
|
#5 |
|
Not Yet Wild
Join Date: Jul 2019
Location: South Carolina
Posts: 36
|
Re: Riot Kit Install, Resuming Restoration
Taking an educated guess at 3" based on brackets in other photos. Stop me now if you disagree. I asked Jake's, they aren't very responsive...
|
|
|
|
|
08-31-2019, 12:46 PM
|
#6 |
|
Gone Wild
Join Date: Feb 2014
Posts: 226
|
Re: Riot Kit Install, Resuming Restoration
I agree with 3”.
Sent from my iPhone using Tapatalk |
|
|
|
|
08-31-2019, 06:03 PM
|
#7 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Riot Kit Install, Resuming Restoration
If this distance is greater than 3", it's a 6" lift kit.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| My review of Plowman's Riot Kit | Electric Yamaha | |||
| Riot Kit Install Time - G29 Drive | Electric Yamaha | |||
| Plowmans Riot Kit!! | Electric Yamaha | |||
| Plowmans Riot Kit!!! | Extreme DC! | |||
| Plowmans Riot Kit!!! | Electric Yamaha | |||
Linear Mode
