|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-14-2010, 01:40 PM | #1 |
Not Yet Wild
Join Date: Feb 2010
Posts: 19
|
Yamaha G14 Cam and Crank
Hello to all.
Just tore my engine apart and found that my Camshaft is cracked in half. Also. the small gear on the crankshaft is a little gummed up but not too bad. I am on a tight budget as we all are. Just finished college and starting to pay back the loans. Just wanted to know where I can get a reasonable camshaft and possibly a crankshaft gear? I am fine with used items. Any information would be a great help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-14-2010, 07:57 PM | #2 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Yamaha G14 Cam and Crank
Hey mullar, good luck on finding those, you never know. I would bet that you're that gonna have to buy new OEM.
|
03-14-2010, 09:17 PM | #3 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Yamaha G14 Cam and Crank
Quote:
|
|
03-14-2010, 11:22 PM | #4 |
Not Yet Wild
Join Date: Feb 2010
Posts: 19
|
Re: Yamaha G14 Cam and Crank
Block at the cam journals was ok. The inside looks good. The gear on the crank is not that bad. One or two of the teeth are a little punched out and a few teeth have some metal rolled over. I am not sure if i can file a little bit of that to clean it up or not.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
87 CC Crank Cam Alignment | Gas Club Car | |||
Help with G1 Crank Seals | Gas Yamaha | |||
94 EZ-GO gxt 804 will not crank | Gas EZGO | |||
no crank no start | Gas Club Car | |||
g1 crank seals | Gas Yamaha |