|
08-23-2012, 08:25 PM
|
#1 |
|
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
driven clutch seized?
been working on my 88' club car trying to get a clone 16hp swapped in and keep finding new ways to spend $$ on it. was going to rebuild the drive clutch but now i think im going to skip it and buy a 780 clone. decided to check the driven clutch and its froze up solid. i got it off the rearend, took off the lock ring/hog nose clip and it wont budge for anything. is there any trick im missing? i learned a lesson about rebuilding/buying new. it probably wouldnt have been in such bad shape except the guy i got it from used it in mud/water, did zero maintenance and left it sitting for about a year or so after the motor blew.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-24-2012, 07:40 AM
|
#2 |
|
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: driven clutch seized?
Got it off. Had to put a long screwdriver through the cam, hold that across a vice and tap the shaft out. It was very corroded. No way that thing was going to work without a rebuild.
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Shimming a driven driven clutch | Gas EZGO | |||
| Driven Clutch Seized to the Shaft | Gas Club Car | |||
| driven clutch | Gas Club Car | |||
| Dive Clutch and Driven Clutch. Is this right?? | Gas EZGO | |||
| Driven Clutch | Golf Carts and Parts | |||
Linear Mode
