|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-14-2013, 10:55 AM | #1 |
Not Yet Wild
Join Date: Jun 2013
Posts: 26
|
Front Receiver Hitch & Push Bar Project
Thought I'd share the first project I've been working on. It's a bit different way of rigging up a push bar on a Club Car. Due to limited space in the trailer, I didn't want anything to extend the length of the Cart, so deceided to use a trailer receiver so the push bar can be removed quickly.
The receiver is a standard 6" long 2" sq. receiver I got at O'Riellys, and I made this simple mount - two 3/8's bolts into the bumper support, and another 1/2" bolt though the bottom into the leaf spring lower plate. Seems quite simple to me, I'm not to sure how well it's going to work yet. Anyway, here's a couple pix - I'll post the push bar part soon, trying to finish that up today. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-14-2013, 11:01 AM | #2 |
Not Yet Wild
Join Date: Jun 2013
Posts: 26
|
Re: Front Receiver Hitch & Push Bar Project
Here's my Nova we'll be using this to push in the pits and on the return road..
|
07-14-2013, 11:19 AM | #3 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,232
|
Re: Front Receiver Hitch & Push Bar Project
sweet nova , what your times ?
|
07-14-2013, 11:26 AM | #4 |
Not Yet Wild
Join Date: Jun 2013
Posts: 26
|
Re: Front Receiver Hitch & Push Bar Project
Thanks -First hit off the trailer last November it ran a 5.30@136 on a shakedown pass after 4 years of work on it. This year we had it out few weeks ago, but ran into gremlins and didn't get to make a pass. Taking it out again next weekend and hope to see at least a 5.0X if all goes ok.
|
07-17-2013, 05:29 PM | #5 |
Not Yet Wild
Join Date: Jun 2013
Posts: 26
|
Re: Front Receiver Hitch & Push Bar Project
Here's the Push Bar Mount - we're going to give it a test run tonight and see how it works.
|
07-17-2013, 08:49 PM | #6 |
Getting Wild
Join Date: May 2013
Location: Mechanicsville, VA
Posts: 92
|
Re: Front Receiver Hitch & Push Bar Project
BADASS
From one drag racer to another, thats the cleanest pushbar mount/system I have seen. Care to make another one ? |
07-17-2013, 10:01 PM | #7 |
Not Yet Wild
Join Date: Jun 2013
Posts: 26
|
Re: Front Receiver Hitch & Push Bar Project
Thanks - We tried it out tonight and pushed the Nova around the block, works really good, even around corners.
Backing up is going to take some practice to do that smooth haha. Took us a few times to get that working ok. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Front receiver hitch for 09 Precedent | Electric Club Car | |||
RXV Rear Step Receiver and hitch | Electric EZGO | |||
Need to add a 2" Hitch Receiver to 09 ST | Gas EZGO | |||
Receiver Hitch Cooler Rack | Design Center | |||
Drive receiver hitch | Gas Yamaha |