|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-06-2014, 10:23 AM | #1 |
Not Yet Wild
Join Date: Sep 2014
Posts: 2
|
non dcs controller swap to a dcs controller.
Here's the deal I have an ez go cart non dcs that had been struggling on hills and had a burning smell after driving it. Yesterday my uncle had came over and looked at it and took the controller cover off and we both noticed the board cover/box melted and warped. At my work we have an ez go cart for parts and I saw the controller was still intact do I took it off but it's dcs controller. Is there a way to make this work being that it was free I would love for this to be possible. The new controller is a ncx300/dcs
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-06-2014, 10:26 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: non dcs controller swap to a dcs controller.
No. they are 2 completely different drive systems. You would have to change motor, F&R, and wiring
I have 2 NPX300ITS controllers New old stock $229 each This is direct replacement for your cart. |
09-06-2014, 10:48 AM | #3 |
Not Yet Wild
Join Date: Sep 2014
Posts: 2
|
Re: non dcs controller swap to a dcs controller.
Do you have an idea as to what usually causes this problem
|
|
|
Similar Threads | ||||
Thread | Forum | |||
controller swap???? | Electric EZGO | |||
RXV Controller Swap or Upgrade ? | Electric EZGO | |||
controller swap? | Electric EZGO | |||
Can i swap G19 with G22 controller? | Electric Yamaha | |||
controller swap question | Electric Club Car |