91' Ezgo Freedom headlight replacement procedure

[Todd Mussman]

Hi everyone, this is my first post and I'm sure not my last.
I have a 91' Ezgo freedom with a burnt out headlight and I cannot figure out how to remove it to replace it. Any tip on doing this would be much appreciated.

Thanks in advance for any help y'all can offer.

Muss

[Todd Mussman]

Bump.

[Sir Nuke]

Muss.....is the headlight set-up you have a STOCK EzGo set-up or an aftermarket set-up? are the bulbs actual sealed beams? or just a small bulb that you remove from the back and replace? we really don't know what you have......good clear pictures would help too....from the front AND rear of the fixture.

[Todd Mussman]

Yessir, they are 91 stock headlamps and they are the sealed type (no way to remove the bulb). I was really hoping there was a way to change out the light without removing the cowl.
I will go snap some pics and post them shortly.

thanks Nuke!

[Todd Mussman]

Bummer. it looks like i need to be a member for 7 days before i can post pics.

I will post as soon as im allowed.

[Sir Nuke]

Originally Posted by Todd Mussman

Bummer. it looks like i need to be a member for 7 days before i can post pics.

I will post as soon as im allowed.

you could always use something like Photobucket to host them if you know what that is.....

[kernal]

I think this is the replacement: https://shop.ezgo.com/products/Headl...-Bracket).html

Google the part no. to check prices. I saw a large variance.

Cart looks like the this one, correct? I never had to change the light so I can't help you there. Sorry.

[Sir Nuke]

Originally Posted by kernal

I think this is the replacement: https://shop.ezgo.com/products/Headl...-Bracket).html

Google the part no. to check prices. I saw a large variance.

Cart looks like the this one, correct? I never had to change the light so I can't help you there. Sorry.

That's what I was thinking too.....just didn't want to possibly put my foot in my mouth to soon, lol

[Todd Mussman]

Originally Posted by Sir Nuke

That's what I was thinking too.....just didn't want to possibly put my foot in my mouth to soon, lol

Thanks Guys! I found the replacement light as well. I'm really needing the guidance on removing the old one without breaking it. Ha!


Sent from my iPhone using Tapatalk

[rabbitreborn]

There are 2 screws on the back side of the housing that you take out. The back part of the housing comes off from behind the cowl trim, and the sealed beam light with the front part of the housing comes off the front of the cowl trim.