07-22-2018, 09:52 AM | #1 |
Not Yet Wild
Join Date: Jul 2018
Posts: 2
|
Ignition Switch
I would lie to know if you can put auto ignition switch (3 pole ign,bat, sol) on a
2 pole harness on a 2010 Precadent. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-22-2018, 12:19 PM | #2 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,218
|
Re: Ignition Switch
If you can make it fit you can do it. Just use the ign set of contacts.
|
07-22-2018, 01:17 PM | #3 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Re: Ignition Switch
In a golf cart the ignition is nothing more than an in-line on and off switch. Use the input and output terminals off the auto ignition and you should be good to go. Main Issue will be clearance with the lock cylinder behind the dash/mount.
|
07-23-2018, 07:38 PM | #4 |
Not Yet Wild
Join Date: Jul 2018
Location: Northwest Indiana
Posts: 19
|
Re: Ignition Switch
I used a lawn mower switch in mine, like said if you have a meter to check use the 2 screws that make contact when the key is in the on position, relaxed, not the full start position. You can use a plain toggle switch if you had to...but pretty sure you are asking so you can have a different key.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
New Ignition Switch | Electric EZGO | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
Ignition switch fir B/S 20 hp | Big Block Talk! | |||
New Ignition Switch | Gas EZGO |