|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-24-2019, 09:56 PM
|
#1 |
|
Gone Wild
Join Date: Oct 2017
Location: San Diego
Posts: 272
|
Differential bearing removal
I have spare Kawasaki rear end that seized up and I decided to take apart ann rebuild for “fun”😂.
I had no problem taking it apart and used a bearing tool to remove 5 of the bearings. There is one bearing, the one that suffered the most damage, that I dont know how to remove. Any ideas? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-24-2019, 10:15 PM
|
#2 |
|
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Differential bearing removal
Is that on the input shaft?
If it got too hot locked up it could have spun the outer race in the case journal. Some persuasion with a slide hammer should get it out. A little heat on the outside might help if it’s really stuck. |
|
|
|
|
04-24-2019, 11:13 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2017
Location: San Diego
Posts: 272
|
Re: Differential bearing removal
Good info.
Thanks for the help👍 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rear Bearing Cap Removal? | Electric EZGO | |||
| Crankshaft Bearing Removal | Gas EZGO | |||
| Crankshaft Bearing Removal | Gas EZGO | |||
| Front Hub Inner Bearing Removal Help | Gas EZGO | |||
| G16 Engine Bearing Removal | Gas Yamaha | |||
Linear Mode
