|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-19-2019, 07:03 AM | #1 |
Not Yet Wild
Join Date: Sep 2017
Location: Pawleys Island
Posts: 16
|
No signal to RXV brake light relay?
2014 RXV with Curtis. I wired up a relay to the red and purple wires under the cup holder as shown here in another thread. No brake lights came on. I checked the wires with a meter and there is no signal coming from them to activate the relay. The relay works and the lights come on if I apply 12 48 volts manually.
I recently had Bob tweak my controller. Is the brake light signal something that can be turned on and off in the programming? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-20-2019, 07:09 AM | #2 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: No signal to RXV brake light relay?
Quote:
|
|
06-20-2019, 09:49 AM | #3 |
Not Yet Wild
Join Date: Sep 2017
Location: Pawleys Island
Posts: 16
|
Re: No signal to RXV brake light relay?
Thanks Bob. I suspect it is off because Im not getting any signal on my meter. I ordered a cheap pull switch to put on the pedal for now but as you know, I don't use the pedal much. Ill probably wait for your next road trip this way if it needs reprogramming.
|
06-20-2019, 05:32 PM | #4 |
Not Yet Wild
Join Date: Sep 2017
Location: Pawleys Island
Posts: 16
|
Re: No signal to RXV brake light relay?
Problem solved. Took the dash apart to install turn signals and found an inline fuse in the signal wires to the relay that was blown. The relay was on the cart when I got it. Was being used to turn on and off a gps unit. Somehow I put the fuse in when I re-purposed the relay. Fuse holder removed = brake lights working. Turn signals and horn all working now.
On to the rear Diff oil change (: Thanks for looking into it Bob. |
06-20-2019, 06:38 PM | #5 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: No signal to RXV brake light relay?
Quote:
I checked your controller settings and you now know, it was enabled. Pull-in is set to 50% and hold-in 40%. I'm glad you figured it out. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Location of brake light relay on 2010 rxv | Electric EZGO | |||
2008.3 Brake Light Relay connections | Electric Club Car | |||
2010 RXV brake light relay? | Electric EZGO | |||
signal light flasher relay for tecscan LED lights | Electric Club Car | |||
Turn signal and brake light wiring | Electric EZGO |