|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-23-2013, 09:37 AM | #1 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
re-powering the G9
Finally gonna swap motors in the G9 today. I had popped the top off the old motor over revving it trying to figure out an issue with the clutch. DUH ME. So anyway...pulling out the stock 420 clone and replacing with a slightly modded 420 clone. Gotta cut the crank and drill and tap the new one. I know I'll be chomping at the bit after it's done to lift it more and get new tires and wheels. If anybody needs suggestions on what to get me for Christmas, just pm me.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-23-2013, 09:46 AM | #2 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: re-powering the G9
I'll speak for us all Chris, I think we gonna need some pics to follow this swap...
|
11-23-2013, 09:59 AM | #3 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: re-powering the G9
Pics guaranteed...
|
11-23-2013, 12:10 PM | #4 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: re-powering the G9
Here she is.
|
11-23-2013, 12:33 PM | #5 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: re-powering the G9
Going in...
|
11-23-2013, 01:20 PM | #6 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: re-powering the G9
Time to drill the crank...
|
11-23-2013, 10:09 PM | #7 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: re-powering the G9
Crank drilled and re tapped. Clutch is on. Motor going back in tomorrow and get everything else buttoned up.
|
11-23-2013, 11:20 PM | #8 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: re-powering the G9
Hey! That looks like Tommy's car!! WTF!!??...
|
11-24-2013, 07:20 AM | #9 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: re-powering the G9
It was one that I rescued from Tom in the cold cold north. It likes living down here in the south with the warmer weather. This is a pic Tom sent me of it when it was up there. Poor thing won't ever have to worry about getting treated like that again.
|
11-24-2013, 09:00 AM | #10 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: re-powering the G9
Looks good!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGo TXT DCS Controller is not powering on | Electric EZGO | |||
Powering 12v Accessories | Electric Club Car | |||
Re-powering the Carryall | Gas Club Car | |||
Powering headlights | Extreme DC! |