![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
![]() ![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Gone Wild
![]() ![]() Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
![]() Can anyone tell me what tool i need to remove the pins from molex nylon connectors?
i believe they are called extraction tools. I looked up extraction tools, and there are thousands of them. I am looking for one that i can use on the nylon connectors that are behind the key switch panel in precedents. It looks like i could use 2 different sizes, since some of the pins are on 18 gauge wire and some are on 14 or 12 gauge? Any help, parts numbers etc?? Thank you for your time. |
![]() |
![]() |
![]() |
#2 |
Gone Wild
![]() ![]() Join Date: Feb 2013
Location: NC/SC
Posts: 1,012
|
![]() In a pinch any small metal tubing that will just fit over the pin will push the barbs back. A small screw driver or ice pick can be used too.
I found this too. https://www.youtube.com/watch?v=Cs-aTLleoL0 |
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() ![]() Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
![]() Thanks for that info. the video is cool, if your wire happens to be the size you can use then pen on. Very cool!
|
![]() |
![]() |
![]() |
#4 | |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#5 |
Gone Wild
![]() Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,170
|
![]() Go too a hobby shop and find a piece of metal tubing that just fits over the pins. This will work to extract the pins. I have had one for years.
|
![]() |
![]() |
![]() |
#6 |
Gone Wild
![]() ![]() Join Date: Dec 2011
Location: Hampton, GA
Posts: 467
|
![]() auto parts store , the round one has the flat tools for GM type connectors, like the grey ones,
the arrow is to a tube that is broken off of mine that covers the spring, the other one is size specific , with a tube & has a rod to push it out, |
![]() |
![]() |
![]() |
#7 |
Not Yet Wild
![]() Join Date: Aug 2013
Posts: 20
|
![]() I thought the connector behind the dash was a Mate-N-Lok series from Tyco AMP.
The extraction tool I use is AMP 305183 ( Mouser has it as 571-305183) |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Forum | |||
Honda gx620 wire rectifire wire ???? | Big Block Talk! | |||
New tool box | Garage and Workshop | |||
48 volt three wire charger/2 wire syustem | Electric Club Car | |||
What Gauge Wire for main hot wire coming off battery | Electric Club Car | |||
2 wire charge meter hot wire to F&R witch? | Electric EZGO |