CC 1990 without Solid State Cntrol Wireing Diagram

RafnsonL · 06-08-2013, 09:51 PM

I recently had the Battery's replaced in my 1990 CC sense then I have no , or Low power in reverse. I suspect that they hooked something up wrong. Where can I find a wiring Diagram or Schematic For this Cart ? It has resistor coils, and I do not see a solid state controller like my EzGo .I found the ID Plate, but can not read anything except the first three digits which are A90

Scott H. · 06-08-2013, 10:02 PM

They hooked the reverse power wire mid pack as the factory does more than likely. Take it off the battery pack and hook it up to where the forward power cable from your switch hooks into the battery pack and you'll get full power in reverse.

BTW, the wiring diagrams are in the pinned threads on the top of this section.

Hope this helps,
-Scott H.

RafnsonL · 06-09-2013, 12:35 PM

Thanks Scott H If it ever stops raining here (South East Minnesota) I will get out there and try this, After looking at the many Diagrams attached, it looks to me like the guy that put these Batteries in used two , the 83-87 and the 88-03 V-glide . What does V-glide mean ?

06-09-2013, 12:59 PM

v glide in club car .. speed controller

06-09-2013, 01:11 PM

36v reverse

RafnsonL · 06-10-2013, 08:06 PM

Thanks for ;your advise Guys, I did as you suggested, and it now works the way it use to.
Again, Thank you very much.

06-08-2013, 09:51 PM	#1
RafnsonL Not Yet Wild Join Date: Jun 2013 Posts: 4	CC 1990 without Solid State Cntrol Wireing Diagram I recently had the Battery's replaced in my 1990 CC sense then I have no , or Low power in reverse. I suspect that they hooked something up wrong. Where can I find a wiring Diagram or Schematic For this Cart ? It has resistor coils, and I do not see a solid state controller like my EzGo .I found the ID Plate, but can not read anything except the first three digits which are A90
RafnsonL Not Yet Wild Join Date: Jun 2013 Posts: 4

06-08-2013, 10:02 PM	#2
Scott H. Gone Wild Join Date: May 2011 Location: Charleston, South Carolina Posts: 672	Re: CC 1990 without Solid State Cntrol Wireing Diagram They hooked the reverse power wire mid pack as the factory does more than likely. Take it off the battery pack and hook it up to where the forward power cable from your switch hooks into the battery pack and you'll get full power in reverse. BTW, the wiring diagrams are in the pinned threads on the top of this section. Hope this helps, -Scott H.

06-09-2013, 12:35 PM	#3
RafnsonL Not Yet Wild Join Date: Jun 2013 Posts: 4	Re: CC 1990 without Solid State Cntrol Wireing Diagram Thanks Scott H If it ever stops raining here (South East Minnesota) I will get out there and try this, After looking at the many Diagrams attached, it looks to me like the guy that put these Batteries in used two , the 83-87 and the 88-03 V-glide . What does V-glide mean ?
RafnsonL Not Yet Wild Join Date: Jun 2013 Posts: 4

06-09-2013, 12:59 PM	#4
crash test dummy Guest Posts: n/a	Re: CC 1990 without Solid State Cntrol Wireing Diagram v glide in club car .. speed controller
crash test dummy Guest Posts: n/a

06-10-2013, 08:06 PM	#6
RafnsonL Not Yet Wild Join Date: Jun 2013 Posts: 4	Re: CC 1990 without Solid State Cntrol Wireing Diagram Thanks for ;your advise Guys, I did as you suggested, and it now works the way it use to. Again, Thank you very much.
RafnsonL Not Yet Wild Join Date: Jun 2013 Posts: 4

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
1990 marathon wireing diagram	Electric EZGO
1990 EZgo Marathon Solid State Has no Power	Electric EZGO
What does solid state mean	Electric Club Car
Please HELP!!! Need wiring diagram for V-Glide to Solid State conversion	Electric Club Car
Need CC 36V resistor to EZGO solid state diagram	Electric Club Car