'06 Precedent - Lights to fuse box

[Tennshooter]

okay I think I have decided to run a 48-12 reducer to a fuse box to hook up my accessories. The '06 precedents have the plug and go light harness so how do I run the + and - from the lights to the fuse box? I assume I just cut them out of the harness and run them directly to the fuse box?

[SaltLifeCC]

Yep you need to run the power going into the switch from the fuse block to the switch. Not sure if you even need to move the ground but make sure to get that answer before doing it.

Make sure you buy a quality reducer that has a switch or put a switch in line. Before I bought the aux battery, I bought a reducer online and decided not to use it because I was worried my kids would leave it on and something would burn up. I also wanted my presets and clock to stay put on my radio and couldn't figure out how to do that with a switched reducer unless I ran a separate feed off of one of the pack batteries to maintain the constant low amp power to the stereo.

[Tennshooter]

Thanks for the quick response to all of my inquiries SaltLife CC!!!!!!