|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-05-2013, 06:13 PM | #1 |
Gone Wild
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
|
IQ Wiring Harness Question throttle piece
Got my wiring harness in. Everything looks kosher except for this piece of the wiring to the throttle/pedal. Looks like there is an interface from the old(Excel) main harness to the pedal assembly that isn't present and won't connect the same way..as if this piece isn't needed for the IQ way.
Anyone seen/know what this is for on the Excel's? Other than that, everything else seems straight forward. Thanks as always. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-05-2013, 07:47 PM | #2 | |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: IQ Wiring Harness Question throttle piece
Quote:
CartTrader |
|
08-05-2013, 08:30 PM | #3 |
Gone Wild
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
|
Re: IQ Wiring Harness Question throttle piece
Well success....we have movement...just backwards. reverse(with buzzer) is forward(slow due to the fact it is probably half power) and forward(no buzzer) is reverse - I think my dentures fell out when I it engaged.
So is that the F1/F2(blue/orange) reversed or the A1/A2(2 gauge)? Or something else? I will go do my research too. Probably won't fix til tomorrow. 2.5 hours to rewire and re-install solenoid and controller. To my original question. I suspect it was some sort of interface into the mCor for Excel carts. It plugged and played without it as I I suspected. I will go update my original post from 2 weeks ago so it will have some sort of continuity. |
08-05-2013, 08:36 PM | #4 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: IQ Wiring Harness Question throttle piece
I had the same problem when I went from RegenII to IQ. The new harness after install, Forward(switch) was reverse w/buzzer...Reverse was forward no buzzer. Had to switch the 2 outer wires on the switch and then all was good.
CartTrader |
08-05-2013, 08:45 PM | #5 |
Gone Wild
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
|
Re: IQ Wiring Harness Question throttle piece
I wasn't so sure its at the switch. I think it is throwing full power(forward in reverse) and half power in forward. Maybe my brain is just tired and not thinking it through - which is why I am will just read for the rest of the night and hide my wrenches from myself until tomorrow. :)
|
08-05-2013, 10:00 PM | #6 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: IQ Wiring Harness Question throttle piece
Try flipping the 2 - 10 gauge wires on the motor around.
CartTrader |
08-06-2013, 10:26 PM | #7 |
Gone Wild
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
|
Re: IQ Wiring Harness Question throttle piece
For the record - all problems solved. Reversed the BLUE/ORANGE wires going into the controller. Forward is now forward. Good/great torque. Took a ride through my ditch after stopping in the bottom. No problem getting out(or in).
Battery meter is fixed. For some reason, I lost my ground to the particular wire that was on the original feed from the harness. Since I had ran a extra wire when I wired up the radio, I used it to tap into the ground. Just ignore that it is red :) dangit!. Life is good! |
08-07-2013, 12:02 PM | #8 | |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: IQ Wiring Harness Question throttle piece
Quote:
For other people's information... There are two flavors of this adapter. One is for IQ, one if for Excel. They look identical, except the Excel version has 461 ohm resistors in each of the three throttle wires, where the IQ has nothing. |
|
08-07-2013, 02:05 PM | #9 | |
Gone Wild
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
|
Re: IQ Wiring Harness Question throttle piece
Quote:
|
|
08-07-2013, 02:42 PM | #10 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: IQ Wiring Harness Question throttle piece
|
|
|
Similar Threads | ||||
Thread | Forum | |||
DIY Wiring Harness | Electric Club Car | |||
Wiring Harness for g2 | Golf Carts and Parts | |||
Wiring Harness | Electric EZGO | |||
g 16a wiring harness | Gas Yamaha | |||
G16 wiring harness with key $50 | Golf Carts and Parts |