|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-27-2020, 06:14 PM | #1 |
Not Yet Wild
Join Date: Jul 2020
Posts: 2
|
No programming port
I have a 2008 club car DS IQ and only get 8 mph. I would like to get the speed code changed to at least 3, but my programming port is not below the forward/reverse shifter as its suppose to be. Where else could it be? Or are the IQ models not programmable?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2020, 06:29 PM | #2 |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: No programming port
First I would look in the stickies and do a speed sensor test as you may be in limp mode...Did the cart always do 8mph.....Yes a DS IQ is progammable and should have the port below the f/r switch...On the Precedent the port is on the underside of the dash...You can plug the programmer directly into the controller if for some reason the port is missing...
|
07-27-2020, 10:04 PM | #3 |
Not Yet Wild
Join Date: Jul 2020
Posts: 2
|
Re: No programming port
Yes it’s been 8mph since I’ve bought the cart. I’ll check out the stickies. Thanks for the reply
|
|
|
Similar Threads | ||||
Thread | Forum | |||
RXV USB/Charger port | Electric EZGO | |||
2019 rxv usb port | Electric EZGO | |||
Wanting to add USB port | Electric Club Car | |||
Hooking up Cig/aux port? | Electric Yamaha | |||
Big port head vs small port heads? | Clone Engine Swaps |