|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-07-2014, 12:10 AM | #11 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Pics of Alltrax controller mounted in EZGO
I mounted a SPM 600 in that location behind the seat (a 600 has a 16" cabinet, and does NOT fit in stock location). Had reversing contactors back there too. Space was kinda tight, so i mounted the controller facing up, instead of down like yurtle did. I took a taller "star car" rear cover and cut one end off (so it would fit, and provided a good air supply to the fan from top-side). Sorry, no pics, maybe i will get some next time its in for routine maintenence.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-07-2014, 04:08 PM | #12 |
Not Yet Wild
Join Date: Mar 2014
Location: Gulf Breeze Florida
Posts: 68
|
Re: Pics of Alltrax controller mounted in EZGO
I tried to put my spm 600 behind the seat and above the motor. I didn't like it so it went on the drivers side frame rail next to the batteries and the reversing contactor and solenoid on the other side. I made all my cables so this worked well.
|
07-07-2014, 04:17 PM | #13 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Pics of Alltrax controller mounted in EZGO
I don't think you could fit anything larger than mine where I mounted mine, without a lift. I doubt mine would have worked without new HD springs. Clearance to the motor is the problem.
|
07-07-2014, 05:56 PM | #14 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Pics of Alltrax controller mounted in EZGO
That motor issue, and reversing contactors were why i mounted it facing up, and higher.
|
07-07-2014, 07:50 PM | #15 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Pics of Alltrax controller mounted in EZGO
Mine is as high as it can go, due to the cover on a TXT.
|
07-07-2014, 10:49 PM | #16 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Pics of Alltrax controller mounted in EZGO
Yep, thats why i cut one end off of a taller "star car" rear cover and used it. Looks just like a ezgo rear cover with a big "hump" in it (and wider, too wide when not cut).
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Briggs Vangaurd mounted pics | Big Block Talk! | |||
EZGO- Alltrax controller | Electric Club Car | |||
Need help wiring Alltrax Controller on 1995 EZGO | Electric EZGO | |||
Alltrax 500 amp controller help for EZGO series TXT | Electric EZGO | |||
Does anyone have pics of an alltrax controller installed on an EZGO PDS? | Electric EZGO |