upgrading my 81, 36v club car

[Sergio]

The "on board" option is about the DC cable with ring connectors and not the mode of operation.

[kielow87]

Thought was wires going to the batteries from the charger port?

[kielow87]

Got it most of the way apart now. Going clean up and repair some of the battery tray.

[DaveMJ]

Originally Posted by kielow87

Thought was wires going to the batteries from the charger port?

Are you planning to mount the charger on the vehicle with permanent wiring. Or will you be charging via a port near the F/R switch?

[kielow87]

Plan on using the charging port

[DaveMJ]

Originally Posted by kielow87

Plan on using the charging port

Not sure why there was a "Lester On Board" line item. Just make sure you aren't being charged for something you don't need.

Good luck with the build, nice to start with a clean slate.

[kielow87]

Thank you sir will do hopefully this should be 90% of what I need.

[simicrintz]

Originally Posted by kielow87

Got it most of the way apart now. Going clean up and repair some of the battery tray.

I've been down this road just recently as well; you are gonna have a lot of fun-enjoy the ride!

[kielow87]

Thank you plan on doing some back reading with it so should be pretty good