|
06-09-2016, 12:37 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2014
Posts: 10
|
Resister
My solenoid stopped clicking.tested bad, how do you test the resister? Thanks for your help, it is much needed!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-09-2016, 01:52 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Resister
The resistor is tested with the ohm Ω meter function the reading across the resistor should be fairly close to the value printed on it or 250-270 for 36 volts and 470 for 48v carts.
|
|
|
|
|
06-09-2016, 02:00 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2014
Posts: 10
|
Re: Resister
Do I have to take it off cart to test it? I'm new to electric carts,and trying to learn. This sight is a lot of help! Thanks
|
|
|
|
|
06-09-2016, 02:17 PM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Resister
yes, remove it for testing.
Lots of good folks here willing to help |
|
|
|
|
06-09-2016, 05:35 PM
|
#5 |
|
Not Yet Wild
Join Date: Jul 2014
Posts: 10
|
Re: Resister
Solenoid came and has plastic on mounting bracket, does it have to ground on cart?1995 ezgo. Old solenoid has medal bracket. It is 36 volts? thanks again
|
|
|
|
|
06-09-2016, 07:05 PM
|
#6 |
|
Gone Wild
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
|
Re: Resister
Plastic is OK. Nothing should be grounded to the frame.
. |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Solenoid resister question? | Electric Club Car | |||
| Pre charge resister | Electric Club Car | |||
| Diode and Resister?? | Electric EZGO | |||
| hot resister wire | Electric EZGO | |||
| 1989 resister ezgo | Electric EZGO | |||
Linear Mode
