|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-11-2018, 10:06 AM | #1 |
Not Yet Wild
Join Date: Oct 2018
Location: Clinton, NC
Posts: 9
|
Turn signal/brake lamp kit
When I purchased my cart it had headlamps and park lights on the rear. My question is what is needed to covert and make the turn signals/brake lights work. I chased the harness and found some wires labeled +12 aux driver/passenger turn signal and -12 aux driving lights and +12 aux driving lights.
2015 EZGO TXT |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-12-2018, 08:44 AM | #2 |
Gone Wild
Join Date: Jan 2013
Location: Saint Petersburg, FL
Posts: 2,089
|
Re: Turn signal/brake lamp kit
Try temporarily putting 12v power to those leads and see what it does. USE a fuse when doing it. If they blink then all you need is power and a switch. If they stay on as long as there is power then you need to regulate that externally.
|
10-12-2018, 10:02 AM | #3 |
Not Yet Wild
Join Date: Oct 2018
Location: Clinton, NC
Posts: 9
|
Re: Turn signal/brake lamp kit
Thanks, any recommended amp rating for the fuse?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
How to wire Brake Turn Signal and Running Lights Together | Gas EZGO | |||
Turn Signal and Brake Lights | Gas EZGO | |||
Brake & Turn Signal Hook Up | Gas Yamaha | |||
PDS Turn Signal & Brake Light Install | Electric EZGO | |||
Turn signal and brake light wiring | Electric EZGO |