Ezgo Shuttering

[JohnnieB]

Originally Posted by EZ-GOLuce

Hi all. I have asked this in the past and hope I have the info ya need to help me. I have 36Volt 2005 EZGO PDS TXT. I have replace the following about a year ago.

The new parts are:
Performance Mild Hills Package. High speed Admiral motor (MOT-B2), 500 Amp Alltrax controller (CON-XCT500PDS) which includes fan assembly and universal mounting adapter, 3 Amp Diode (CON-004), Resistor precharge for 36V 400A solenoid (CON-034), and HD Solenoid (SOL-1023). 4 gauge Battery Cable set (BAT-1006) and mounting kit to mount HD solenoid to Alltrax controller (CON-XCTUM-EZ), New stock Differential, Motor, ITS Throttle and a new tow/run switch.

The following is what it's doing:
When I turn on key and put in reverse, as soon as I touch the pedal, it clicks and starts moving like I floored the pedal. If I put it in forward, it clicks and starts jerks/jumps forward. And then other times it works perfectly.
I have checked gears, wiring, fuses, ITS Throttle, replaced solenoid and still does it.

Thanks for any help you might have.

The XCT48500-PDS needs a regen diode rather than a Pre-charge resistor.

Remove the Pre-charge resistor and try cart without it.

Install a 6A 660V diode in near future.

[EZ-GOLuce]

I will see what I can do and check voltage. Thanks Scotty.
and i will double check what they sent with the package. Thanks JohnnieB
.

[EZ-GOLuce]

Will be checking this weekend. Got with alltrax and they said to hook my laptop to it and use a app they sent me to make sure it is set up right. W
ill let ya'll know what happens. Will also check voltage while being used.