|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-15-2019, 08:11 AM | #1 |
Not Yet Wild
Join Date: Jun 2019
Location: Coastal South Carolina
Posts: 43
|
Battery hold down bracket is not coming out
Ezgo medalist battery hold bracket is not coming out preventing me from removing batteries
What do I do? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-15-2019, 08:26 AM | #2 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Battery hold down bracket is not coming out
Get a little wonder bar in there and pry it up. Tape up the bar if youre worried about dropping it across the post. A little tap, tap with a hammer should help bust it loose. Worst case, you can drill out a very small part of the top of the plastic piece to give a little relief from the rod.
|
07-15-2019, 11:35 AM | #3 |
Gone Wild
Join Date: Feb 2019
Location: God's Country America
Posts: 883
|
Re: Battery hold down bracket is not coming out
I always try some penetrating oil like WD40 on the threads. Allow it to soak in for a while. My best results are when it sits overnight. But I have had some results in a few hours.
|
07-15-2019, 11:53 AM | #4 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Battery hold down bracket is not coming out
The plastic part slides off the threads. Just pull it hard. [emoji4]
|
07-15-2019, 12:38 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,006
|
Re: Battery hold down bracket is not coming out
Thread the nut back on the top of the hold downs until the thread reaches the edge of the nut, while prying up, tap the nut with a hammer. Alternate sides until you get it off..
|
07-15-2019, 02:18 PM | #6 |
Not Yet Wild
Join Date: Jun 2019
Location: Coastal South Carolina
Posts: 43
|
Re: Battery hold down bracket is not coming out
I ended up tapping the bolts with a rubber mallet and somehow it ended up coming out!
Thanks all Sent from my iPhone using Tapatalk |
07-15-2019, 05:20 PM | #7 |
Not Yet Wild
Join Date: Aug 2018
Location: Washington State
Posts: 13
|
Re: Battery hold down bracket is not coming out
I’ll send you a new one, pay for shipping. Got 2 by mistake
Sent from my iPhone using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Battery Hold Down | Electric Club Car | |||
Rxv battery hold down | Electric EZGO | |||
RXV Battery Hold Downs for 6 battery tray holder | Electric EZGO | |||
Battery hold down | Electric Club Car | |||
Battery hold down | Electric EZGO |