2016 Cushman (TXT48) 6 passenger No Ignition Power

CCC · 09-09-2019, 02:59 PM

2016 Cushman With a curtis 400amp 1268 6 Passenger. We installed a radio dash and new light kit (madjax new style). since install cart has no power going to igniton switch or forward reverse. Controller will not power up and handheld will obviously not work. The run tow is operating normally and cannot find a decent wiring diagram. the controller and solenoid are isolated in the front pod and were never touched. battery pack voltage is 50.4V. I have power at solenoid and the 60amp fuse on solenoid is good. Also whatever the 48v speciality fuse about the controller is good. Please some one help me in the right direction. pretty much i know its not the run tow, the controller is not powering on, and the ignition has no power.

BobBoyce · 09-10-2019, 12:41 PM

The 48V SepEx carts with the 1268 controllers were not too good due to the motor used. It needs a 60V or 72V pack to wake it up. Use an Alltrax controller that can handle the voltage.

09-09-2019, 02:59 PM	#1
CCC Not Yet Wild Join Date: Jun 2019 Posts: 1	2016 Cushman (TXT48) 6 passenger No Ignition Power 2016 Cushman With a curtis 400amp 1268 6 Passenger. We installed a radio dash and new light kit (madjax new style). since install cart has no power going to igniton switch or forward reverse. Controller will not power up and handheld will obviously not work. The run tow is operating normally and cannot find a decent wiring diagram. the controller and solenoid are isolated in the front pod and were never touched. battery pack voltage is 50.4V. I have power at solenoid and the 60amp fuse on solenoid is good. Also whatever the 48v speciality fuse about the controller is good. Please some one help me in the right direction. pretty much i know its not the run tow, the controller is not powering on, and the ignition has no power.
CCC Not Yet Wild Join Date: Jun 2019 Posts: 1

09-10-2019, 12:41 PM	#2
BobBoyce Gone Insane Join Date: Oct 2015 Location: TN/NC/GA Tri-state area Posts: 3,952	Re: 2016 Cushman (TXT48) 6 passenger No Ignition Power The 48V SepEx carts with the 1268 controllers were not too good due to the motor used. It needs a 60V or 72V pack to wake it up. Use an Alltrax controller that can handle the voltage.

Similar Threads
Thread	Forum
2016 TXT48 Speed increase?	Electric EZGO
2016 TXT48 Diagnostic Mode?	Electric EZGO
2016 TXT DCS/PDS/TXT48 Identification	Electric EZGO
Tryouts no to install radio to ignition switch in 2016 Ezgo TXT	Gas EZGO
Cushman 8 Passenger Golf Cart	Electric golf carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum