Wont Pull itself

scottyb · 09-02-2010, 07:08 PM

Quote:

Originally Posted by gornoman

My wife has a habit of leaving her foot slightly on the gas as she changes from reverse to forward, and in our modified cart the torque stress is quite a bit. I'm not blaming it on HER, but she isn't helping them last any longer. Of course, the full throttle starts at the various cart competitions don't help either.....

Yes, the hubs are the weak link in the drivetrain.

I would rather change a drum than an axle

Hey....... you're not calling Mrs. G a lead foot now are you

gornoman · 09-02-2010, 07:09 PM

She can drive the cart the way it was intended! Balls to the walls!

scottyb · 09-02-2010, 07:12 PM

My wife is just the opposite. She gets in my carts and creeps along

I'm on the side yelling floor it ~ punch it, Go go go

Nick Smith · 09-03-2010, 01:02 PM

Does anyone have a picture of how the controller, and selenoid are wired. I think it is a wiring problem. Replaced the main leads to the motor and it solved most of the fluttering problem, but now have lost reverse and cant run it because the motor gets extremely hot (very quickly)

Thanks

Nick Smith · 09-03-2010, 01:08 PM

This is a 97 model, model number H14.
Need all the help I can get!!!!

gornoman · 09-03-2010, 01:17 PM

Does this cart have a toggle switch on the controller cover?

Nick Smith · 09-03-2010, 01:37 PM

Yes and it is set correctly

gornoman · 09-03-2010, 01:49 PM

Good, now we know that you have a 1997 DCS model drivetrain.

You will find a schematic here:

http://www.buggiesgonewild.com/elect...g-manuals.html

Be sure you are using the diagrams marked for DCS carts.

09-02-2010, 07:09 PM	#12
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,284	Re: Wont Pull itself She can drive the cart the way it was intended! Balls to the walls!

09-02-2010, 07:12 PM	#13
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,401	Re: Wont Pull itself My wife is just the opposite. She gets in my carts and creeps along I'm on the side yelling floor it ~ punch it, Go go go

09-03-2010, 01:02 PM	#14
Nick Smith Not Yet Wild Join Date: Sep 2010 Posts: 7	Re: Wont Pull itself Does anyone have a picture of how the controller, and selenoid are wired. I think it is a wiring problem. Replaced the main leads to the motor and it solved most of the fluttering problem, but now have lost reverse and cant run it because the motor gets extremely hot (very quickly) Thanks
Nick Smith Not Yet Wild Join Date: Sep 2010 Posts: 7

09-03-2010, 01:08 PM	#15
Nick Smith Not Yet Wild Join Date: Sep 2010 Posts: 7	Re: Wont Pull itself This is a 97 model, model number H14. Need all the help I can get!!!!
Nick Smith Not Yet Wild Join Date: Sep 2010 Posts: 7

09-03-2010, 01:17 PM	#16
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,284	Re: Wont Pull itself Does this cart have a toggle switch on the controller cover?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-03-2010, 01:37 PM	#17
Nick Smith Not Yet Wild Join Date: Sep 2010 Posts: 7	Re: Wont Pull itself Yes and it is set correctly
Nick Smith Not Yet Wild Join Date: Sep 2010 Posts: 7

09-03-2010, 01:49 PM	#18
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,284	Re: Wont Pull itself Good, now we know that you have a 1997 DCS model drivetrain. You will find a schematic here: http://www.buggiesgonewild.com/elect...g-manuals.html Be sure you are using the diagrams marked for DCS carts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
G-16 Runs Good, Wont Pull	Gas Yamaha
86 EZ GO gas wont pull itself hardly	Gas EZGO
My Buggy Wont Pull Fwd Or Bkwd??	Gas EZGO
95 ezgo wont pull	Gas EZGO
what is the most i could pull	Gas EZGO