driven clutch spring settings

ckraker · 02-11-2010, 11:16 PM

I'm going to be reassembling my driven clutch pretty soon. I got my new spacer and sheave, and plan on throwing my plastic spacer in the garbage(thanks for that tip guys). My question is with the spring. I didn't know I had options for putting the spring in. I'm not even sure what setting it was before I took it apart. What holes do I put the spring ends in? And what exactly does it change?

Keep in mind I have a 16 hp motor and a stock black spring.
Thanks

TheNewGuy · 02-12-2010, 05:50 AM

I would set it at B2, that should work good for your setup.

Flintrock · 02-12-2010, 08:59 AM

B4 is the stock setting, but I set mine at B2 with about a third of a turn...

TheNewGuy · 02-12-2010, 09:29 AM

Quote:

Originally Posted by Flintrock

B4 is the stock setting, but I set mine at B2 with about a third of a turn...

Yep, with the bigger engine Tom at CPP recommends B2 and it works great for me.

Flintrock · 02-12-2010, 09:32 AM

Quote:

Originally Posted by TheNewGuy

Yep, with the bigger engine Tom at CPP recommends B2 and it works great for me.

Should give you a little more kickinthepantsgiddyup

02-11-2010, 11:16 PM	#1
ckraker Not Yet Wild Join Date: Oct 2009 Location: Michigan Posts: 54	driven clutch spring settings I'm going to be reassembling my driven clutch pretty soon. I got my new spacer and sheave, and plan on throwing my plastic spacer in the garbage(thanks for that tip guys). My question is with the spring. I didn't know I had options for putting the spring in. I'm not even sure what setting it was before I took it apart. What holes do I put the spring ends in? And what exactly does it change? Keep in mind I have a 16 hp motor and a stock black spring. Thanks

02-12-2010, 05:50 AM	#2
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,046	Re: driven clutch spring settings I would set it at B2, that should work good for your setup.
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

02-12-2010, 08:59 AM	#3
Flintrock Raised by coyotes Join Date: Nov 2008 Location: Central Texas Posts: 5,658	Re: driven clutch spring settings B4 is the stock setting, but I set mine at B2 with about a third of a turn...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
G1 Driven Clutch spring	Gas Yamaha
driven clutch	Big Block Talk!
need driven clutch power spring	Golf Carts and Parts
wtb driven clutch for 91 ez go	Golf Carts and Parts
Driven Clutch Spring Installation	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum