|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-29-2022, 08:56 PM | #31 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: RXV Curtis Controller won't move
Quote:
Sent from my SM-G991U using Tapatalk |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2022, 03:56 AM | #32 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,237
|
Re: RXV Curtis Controller won't move
Yes, normally I can see the faults with the programming station, but the controller is bad. You're unable to connect with the controller and your diagnostic plug isn't in the best of shape. I know you said that the plug and wiring is good but myself I would need to prove that to myself before I would scrap that controller.
|
06-30-2022, 07:28 AM | #33 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: RXV Curtis Controller won't move
Quote:
Thanks for the help! Sent from my SM-G991U using Tapatalk |
|
06-30-2022, 01:31 PM | #34 |
Gone Wild
Join Date: Sep 2021
Location: Pa
Posts: 279
|
Re: RXV Curtis Controller won't move
You can troubleshoot it without a handheld but it's more time and work. Basically you eliminate everything by taking voltage readings at the controller plug. I have to do that with the Danaher controllers. You will need a set of piercing probes for a meter. We can check all the inputs and outputs and go from there. Correct me if I'm wrong, the issue with the cart is the brake not releasing ?
The first thing to check is the 5 volt output (pin 15, orange wire). I believe the ground for that is pin 18. I'll double check when I get to the shop. |
06-30-2022, 05:44 PM | #35 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: RXV Curtis Controller won't move
Quote:
Sent from my SM-G991U using Tapatalk |
|
06-30-2022, 06:23 PM | #36 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: RXV Curtis Controller won't move
Quote:
Sent from my SM-G991U using Tapatalk |
|
06-30-2022, 06:46 PM | #37 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: RXV Curtis Controller won't move
Hallelujah! Changed the solenoid and she runs! All this over a solenoid! Glad I didn't but another controller! Thanks guys!
Sent from my SM-G991U using Tapatalk |
06-30-2022, 07:00 PM | #38 |
Gone Wild
Join Date: Sep 2021
Location: Pa
Posts: 279
|
Re: RXV Curtis Controller won't move
Glad you got it fixed. Thanks for the update
|
06-30-2022, 07:54 PM | #39 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,237
|
Re: RXV Curtis Controller won't move
Great job it always feels good to get them going again...
Thanks for the update... |
|
|
Similar Threads | ||||
Thread | Forum | |||
36 volt ez go/ curtis controller wont move | Electric EZGO | |||
1999 TXT DCS w/Curtis controller will not move after being towed in run mode | Electric EZGO | |||
Can i change out curtis controller 1264-5407 to a curtis 1510A-5251 by repin the con | Electric EZGO | |||
Stock curtis 300amp controller to Alltrax SR controller for a 94 club car ds | Electric Club Car | |||
Is the Curtis 1311-1101 Controller Handset PMC a good controller | Electric EZGO |