|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-13-2023, 09:15 AM | #1 |
Not Yet Wild
Join Date: Dec 2017
Posts: 5
|
2019 Drive2 EFI - no electrical to gauge & won’t run
Cart was running fine then dropped all electrical to the gauge/motor while underway. Had to tow the cart home. Lights still work, battery is good.
I checked all the fuses at the cluster near the battery (4 fuses there) and one underneath the cup holder. What am I missing? Is there another main fuse somewhere? Cart is acting as if the key is off, no power to ignition, starter, or gauges, just completely dead. Any trouble shooting ideas would be appreciated. Also, unrelated, cart has always had the brake lights stay on for a prolonged period of time after parking the cart and keying the ignition off. Is that normal? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-16-2023, 11:10 PM | #2 |
Gone Wild
Join Date: Jan 2015
Location: Stephenville, TX
Posts: 202
|
Re: 2019 Drive2 EFI - no electrical to gauge & won’t run
Brake lights stay on until they time out (about 30 seconds I think) or the brake is released. If you release the brake they should go off immediately.
|
01-17-2023, 12:55 AM | #3 |
Not Yet Wild
Join Date: Dec 2017
Posts: 5
|
Re: 2019 Drive2 EFI - no electrical to gauge & won’t run
SOLVED— I found a bad connection in the 4 - fuse block. It would have been a bitch to change out the whole block. So I just cut out the bad circuit and wired in an in line fuse. The other 3 circuits are fine. All is good.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Plowmans Kit and TBI on 2019 Drive2 | Gas Yamaha | |||
2019 Drive2 - Grounds? | Gas Yamaha | |||
2019 Drive2 Top Squeaks and Creaks | Electric Yamaha | |||
Gas Gauge electrical issue G29 | Gas Yamaha |