|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-01-2008, 03:08 PM | #1 |
Getting Wild
Join Date: Jan 2008
Posts: 91
|
Its-pot Volts
What Should The Pot Volts Be, Im Reading .1- .3 It Is A Pds Cart, Thanks, Kirk
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-01-2008, 03:49 PM | #2 |
Gone Wild
Join Date: Dec 2006
Posts: 679
|
Re: Its-pot Volts
What the voltage should be is an advanced question that only the controller designer would know. EZ-GO is typically 0-5k ohms when nothing is connected to the pot wires but an ohmmeter.
|
02-01-2008, 04:12 PM | #3 |
Getting Wild
Join Date: Jan 2008
Posts: 91
|
Re: Its-pot Volts
thanks nate, im getting 1-5 disconnected, kirk
|
02-01-2008, 04:14 PM | #4 |
Getting Wild
Join Date: Jan 2008
Posts: 91
|
Re: Its-pot Volts
error, i meant 1-3
|
02-01-2008, 09:11 PM | #5 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Its-pot Volts
An ITS throttle assembly is not a potentiometer type throttle. If I remember correctly the voltage on an ITS type throttle runs from 1-5 vdc. 1 being no throttle 5 being wide open. Don't quote me on that because its been a while. If I get a chance tommorow I will check the voltage on Muaythia's cart at no throttle and wide open.
|
02-01-2008, 10:10 PM | #6 |
Gone Wild
Join Date: Dec 2006
Posts: 679
|
Re: Its-pot Volts
Roady, I did not know if PDS used an inductive throttle or not. Sorry kirkroediger.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Converting 98, G16 from 36 to 48 volts | Electric Yamaha | |||
12 volts source | Big Block Talk! | |||
extra volts | Extreme DC! | |||
72 volts all with 6 volts? | Extreme DC! | |||
12 volts with key ON? | Gas Yamaha |