|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-02-2008, 04:30 PM | #1 |
Not Yet Wild
Join Date: May 2008
Location: Indiana
Posts: 32
|
Problems Wireing Lights
Order a light kit fro BU, for my dad's cart EzGo 07, And everything went well except never could get the lights to burn? Iam lost? And 2nd the turn singal light(amber), how do you replace the bulb? This was a Premium light kit, with lights and turn singals, they seem to be sealed, now you can replace the head light bulbs but not the turn? Is there a trick to getting them wired because i've wired alot of lights on different things and have never had this much problem with lights, I was ready to scrap the kit and buy just a basic lights from Auto-Zone, if i had'nt cut out the opening for the lights to fit.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-02-2008, 06:21 PM | #2 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: Problems Wireing Lights
If it is like all the rest, grab the rubber on the back of the bulp and turn it to the left 1/4 turn and pull it out. The bulb should push in or pull out.
|
06-02-2008, 06:52 PM | #3 |
Gone Wild
Join Date: Jun 2008
Location: LINWOOD, MI
Posts: 1,362
|
Re: Problems Wireing Lights
The first thing I would do is make sure you have power to the bulbs before you go and replace anything. A lot of times it could be a fuse, bad connection or that relay box in the harness.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EzGO Marathon Directional Wireing | Gas EZGO | |||
want to add lights and marker lights | Electric Club Car | |||
lights go dim then normal | Gas Yamaha | |||
Precedent Car lights | Electric Club Car | |||
lights diagram | Electric golf carts |