lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-12-2017, 08:34 AM   #1
TheJoshHarding
Not Yet Wild
 
Join Date: Jul 2017
Posts: 65
Default RXV Reducer Question

Hi gang,
I have a 2014 RXV. I installed (but did not hook up the wiring to):
-Wet Sounds Stealth 10 (10 Amps at normal volume)
-Wet Sounds AS-6 Sub (15 amps at normal volume)
-Million Color LED underbody (0.54 amps)

I have a 30-amp reducer (same as madjax), that I plan on wiring to a Blue Seas fuse block. I will have an in-line switch on the lights and sound bar (the sub turns off when the sound bar is powered down).

Am I better off wiring to the solenoid in this configuration or to the battery set? I know RXV's are extremely delicate with their wiring/control system, so I want to "measure twice and cut once" with this setup. I know to put it in tow mode before doing anything, but I am looking for some guidance if possible. I feel like I have the right components, I just don't want to ruin the cart during the install, or underpower the sound system by wiring to the wrong source.
TheJoshHarding is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-12-2017, 09:38 AM   #2
TheJoshHarding
Not Yet Wild
 
Join Date: Jul 2017
Posts: 65
Default Re: RXV Reducer Question

I'll even paypal someone an Abraham Lincoln to spoon feed me some pictures so I don't screw this up.
TheJoshHarding is offline   Reply With Quote
Old 09-12-2017, 10:03 AM   #3
TheJoshHarding
Not Yet Wild
 
Join Date: Jul 2017
Posts: 65
Default Re: RXV Reducer Question

TheJoshHarding is offline   Reply With Quote
Old 09-12-2017, 10:04 AM   #4
TheJoshHarding
Not Yet Wild
 
Join Date: Jul 2017
Posts: 65
Default Re: RXV Reducer Question

TheJoshHarding is offline   Reply With Quote
Old 09-12-2017, 11:03 AM   #5
dougs_huntingcart
Gone Wild
 
dougs_huntingcart's Avatar
E-Z-GO
 
Join Date: Oct 2012
Location: Canyon Lake, TX
Posts: 628
Default Re: RXV Reducer Question

I wired my reducer to the solenoid... I'm sure someone who knows better will chime in...
dougs_huntingcart is offline   Reply With Quote
Old 09-12-2017, 01:43 PM   #6
swm63
Gone Wild
 
Join Date: Nov 2014
Location: New Albany, Indiana
Posts: 573
Default Re: RXV Reducer Question

Your best bet is Sergio or BobBoyce. RXV is a different animal.
swm63 is offline   Reply With Quote
Old 09-12-2017, 06:04 PM   #7
TheJoshHarding
Not Yet Wild
 
Join Date: Jul 2017
Posts: 65
Default Re: RXV Reducer Question

Sounds good. Hopefully someone can help with a picture.
TheJoshHarding is offline   Reply With Quote
Old 09-12-2017, 07:42 PM   #8
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: RXV Reducer Question

Quote:
Originally Posted by swm63 View Post
Your best bet is Sergio or BobBoyce. RXV is a different animal.
The +48V input wire of the reducer would connect to the large terminal of the solenoid that has the cable that connects to the B+ terminal of the controller. The - input wire of the reducer would connect to the battery pack -terminal, or the B- terminal of the controller. They are both the same potential (voltage level).

Bob
BobBoyce is offline   Reply With Quote
Old 09-12-2017, 07:55 PM   #9
TheJoshHarding
Not Yet Wild
 
Join Date: Jul 2017
Posts: 65
Default Re: RXV Reducer Question

Bob,
Thanks for the reply. Is there a certain color cable I should be looking for coming off that Solenoid?
TheJoshHarding is offline   Reply With Quote
Old 09-12-2017, 10:19 PM   #10
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: RXV Reducer Question

Quote:
Originally Posted by TheJoshHarding View Post
Bob,
Thanks for the reply. Is there a certain color cable I should be looking for coming off that Solenoid?
The factory cables on the solenoid can be red or blue. I upgraded mine to 2 guage.

Bob
BobBoyce is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
30 amp 48/12 reducer question Electric Club Car
Reducer question 36v to 12v Electric EZGO
DC to DC reducer question Electric Club Car
Yet another 48/12 Reducer question Electric Club Car
RXV DC Reducer question Electric EZGO


All times are GMT -5. The time now is 05:20 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.