Charger Receptacle

yawood · 02-17-2019, 09:29 PM

Quote:

Originally Posted by Ribber

My meter doesn't have continuity setting, but I get pack voltage on each lug of fuse. But, nothing on the any of the 3 plug ins.

Pics of wiring below. Just like it was on OEM.

If your meter reads resistance (Ohms) then you don't need a continuity setting just measure the resistance. If it is small (Zero Ohms preferably) then there is continuity.

NoleFan4Ever · 02-17-2019, 09:50 PM

Quote:

Originally Posted by Ribber

The fuse is broke. I must have broke when tightening the nut, or it could have been broke to begin with. Either way, it's $30 gone. Replaced the end on my old cable and re-installed the OEM. All is good now and charging.

Quick fix...

WalterM6 · 02-18-2019, 11:38 AM

What I would do in that situation. Take one wire out out of a stranded #10 wire and solder it in place of the fuse.

Fairtax4me · 02-19-2019, 10:26 AM

A new fuse is like $15.

02-18-2019, 11:38 AM	#13
WalterM6 Gone Wild Join Date: Apr 2017 Location: SE TN Posts: 2,270	Re: Charger Receptacle What I would do in that situation. Take one wire out out of a stranded #10 wire and solder it in place of the fuse.

02-19-2019, 10:26 AM	#14
Fairtax4me Bonafide Nincompoop Join Date: Dec 2015 Location: Charlottesburg Va Posts: 8,987	Re: Charger Receptacle A new fuse is like $15.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
New charger receptacle	Electric EZGO
Charger/Receptacle help!!	Electric Club Car
G29 MAC charger receptacle	Electric Yamaha
g8 charger receptacle	Electric Yamaha
Looking for: Charger receptacle and end	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum