|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
02-18-2019, 03:44 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2019
Posts: 14
|
Max RPM for stock GE MTR Club car excel
I recently installed a new Alltrax xct400 controller, solenoid and cable kit and speed increased to 18-19 MPH on an otherwise stock cart. Should I be seeing any more speed?
The motor whines on takeoff...is that normal? It’s a GE motor Does anyone know max RPM on the Ge motor? Regen braking is very heavy on pedal up...is that the normal setting? Thanks for the help! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-18-2019, 07:54 AM
|
#2 |
|
MOD of all BS!
 Join Date: Sep 2011
Location: Florida
Posts: 17,501
|
Re: Max RPM for stock GE MTR Club car excel
All that is adjustable thru the Alltrax Tool Kit. RPM's on that poor GE motor should should probably be 5000/5500 if it is capable of getting there. Most motors are good to 6000 but yours is a stock design.
|
|
|
|
|
02-18-2019, 10:09 AM
|
#3 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Max RPM for stock GE MTR Club car excel
The GE Motor was never offered on the Club Car Excel system. You either have an IQ system with a GE motor, or an Excel system with an AMD/ADC motor. If you have an Excel with a GE Motor, somebody has swapped it in. It's not supposed to be there.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Stock Excel/Eric Control | Electric Club Car | |||
| Help... Club car excel vs IQ . Which is better | Lifted Golf Carts | |||
| 2010 precedent excel i2 w/excel braking | Electric Club Car | |||
| OBC in 2014 Excel Club Car? | Electric Club Car | |||
| club precedent excel help | Electric Club Car | |||
Linear Mode
