|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-07-2010, 08:46 PM | #1 |
Not Yet Wild
Join Date: Jul 2010
Posts: 2
|
1990 EZ-GO rebuild & questions
I have a 1990 EZ go and the rear end has a sprocket attached instead of a belt pulley. I am unsure of what engine would be best for the job. and what need to hook up and not hook up like the leaver attached to the gas petal that goes to the rear end? i have no idea what that dose. why dose the gas need to be hooked up to the differential?. I was looking at a 450 cc motorcycle and clutch setup, since i don't have the money yet.For a drive pulley and then belt clutch. any advice for installing an old dirt bike setup in this frame? and or changing out the sprocket for a belt? Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1990 ezgo rebuild. Advise needed! | Gas EZGO | |||
1990 2-Stroke Rebuild? | Gas EZGO | |||
1990 EZ GO Caburetor rebuild kit | Gas EZGO | |||
1990 EZGO Workhorse GXI-800 rebuild | Members Rides | |||
1990 Piston and head questions | Gas Club Car |