|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-19-2013, 08:25 PM | #1 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
G1-Need bolt size help
Hey fellas.... Does anyone know the thread size and the length of these two bolts? They are the bolts that are bolted to the cylinder and hold on the covers for cooling. They must have come loose and fell out at some point. Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-19-2013, 10:41 PM | #2 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: G1-Need bolt size help
Ill look thru my stuff tomorrow and try to figure it out.I should be putting on the shrouds tomorrow afternoon.
|
02-20-2013, 05:56 AM | #3 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: G1-Need bolt size help
That would be great. I'm don't want to go to the hardware store and play the guessing game.
|
02-20-2013, 07:41 AM | #4 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: G1-Need bolt size help
Gotcha!
|
02-20-2013, 06:23 PM | #5 |
Gone Wild
Join Date: Nov 2008
Posts: 370
|
Re: G1-Need bolt size help
i believe its 8mm but not positive, been a while since i put Crank Seals in mine.
|
02-20-2013, 07:03 PM | #6 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: G1-Need bolt size help
Field, I can't find but one of mine! I'm positive they're 6mm and I'm just going to get some longer ones at the hardware and cut them to whatever length I need. Sorry I couldn't help.
|
02-20-2013, 07:41 PM | #7 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: G1-Need bolt size help
Steve. I'm thinking there 8mm. I just pulled the secondary off and I'm pretty sure the two bolts that I threaded into the outer sheave for the puller were 6mm. Gonna pick them up this weekend so I will let you know. Thanks
|
02-20-2013, 07:55 PM | #8 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: G1-Need bolt size help
Cool!
|
02-23-2013, 12:58 PM | #9 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: G1-Need bolt size help
Just a follow up. Bolts were 6mm. Got them installed and now everything is nice and tight.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Help with a bolt size | Electric EZGO | |||
bolt size | Gas Club Car | |||
What size bolt | Big Block Talk! | |||
I need a bolt size | Electric EZGO | |||
96 DS stock drive clutch bolt size (exterior bolt) | Gas Club Car |