|
04-20-2008, 10:05 AM
|
#31 |
|
Not Yet Wild
Join Date: Mar 2008
Location: S. GA
Posts: 65
|
Re: 13hp clone
I HAD MY CRANK TURNED FOR 50 BUCKS AT A LOCAL MACINE SHOP. STILL HAVE THE STOCK EXHAUST ON . LOTS OF ROOM IN THE CARRYALL 2.
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-21-2008, 07:27 PM
|
#32 |
|
Frog Hunter
Join Date: Dec 2006
Location: Little Rock, Ar
Posts: 1,161
|
Re: 13hp clone
I forgot to mention the a new clutch was needed. Sorry about that...
 |
|
|
|
|
04-21-2008, 07:32 PM
|
#33 | |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 13hp clone
Quote:
|
|
|
|
|
|
04-21-2008, 09:19 PM
|
#34 |
|
Getting Wild
Join Date: Jan 2008
Posts: 147
|
Re: 13hp clone
More questions about the 13 and 16 clone.
The fuel pump/tank issue. I understand that these engines are designed to run gravity feed with the small tank on top so I'm curuoius if there are any alternatives. Can you remove the tank and run a fuel pump out of the stock tank? Would it have to be an electric fuel pump if the clone didn't leave a port for vacuum? Hows the torque curve as felt by the old "seat of the pants test" especially when mashing the throttle in the area of about half speed cruising? |
|
|
|
|
04-21-2008, 09:31 PM
|
#35 | |
|
Home of the Teeny Weaney
Join Date: Dec 2007
Location: SW Mich.
Posts: 1,013
|
Re: 13hp clone
Quote:
 ......did y............. nevermind  |
|
|
|
|
|
04-21-2008, 09:49 PM
|
#36 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 13hp clone
What ?!!
Oooh, ...Duh! Yeh, what's their #? |
|
|
|
|
04-22-2008, 04:22 PM
|
#37 |
|
Gone Wild
Join Date: Aug 2007
Location: Jerusalem AR
Posts: 214
|
Re: 13hp clone
I'm using the gravity fed tank that came on the motor.
I strap a 2 gal. gas can where the factory tank was but we've ridden all day and never had to refuel. A missing member from this forum (NO NO EZGO) posted these motors wouldn't run off the cart tank because of the vacuum fuel pump and they are very picky about fuel pressure so I decided to use the gravity fed just to avoid problems. Bryan |
|
|
|
|
04-22-2008, 11:17 PM
|
#38 |
|
Frog Hunter
Join Date: Dec 2006
Location: Little Rock, Ar
Posts: 1,161
|
Re: 13hp clone
I'd get one of those inline hand fuel pumps like that on a boat and then use the stock tank. Everytime your start your cart, just pump a little in. Shouldn't have to do it very much.
|
|
|
|
|
04-29-2008, 03:53 PM
|
#39 |
|
Not Yet Wild
Join Date: Mar 2008
Posts: 34
|
Re: 13hp clone
What did everyone do for belts for the 13hp motor? I'm having to move the motor up two inches, so my stock belt won't work.
Sooner or later I'm going to get this motor working. Any help would be appreciated! |
|
|
|
|
04-29-2008, 06:34 PM
|
#40 |
|
Frog Hunter
Join Date: Dec 2006
Location: Little Rock, Ar
Posts: 1,161
|
Re: 13hp clone
I put a 3/16" spacer inbetween my driven clutch faces to accept a 1 3/16" belt found on atvs and other stuff so I could get the perfect length.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 13HP came in one piece | Big Block Talk! | |||
| Having some fun with 13hp | Videos | |||
| 13hp Club Car Swap | Big Block Talk! | |||
| My 13hp engine update | Big Block Talk! | |||
Linear Mode
