EZGO elite dash

wolly · 08-04-2016, 09:39 PM

Im looking into buying one of those prefab elite dashes for an EZGO TXT with the speaker holes and stereo holes pre-cut. The dimensions it gives for the speakers are 6 inches. I was wondering if anyone has had any experience with these dashes and if so, will a 6.5" speaker be able to fit in there or is there no room for a bigger size. Whats the best place to shop for speakers? Thanks in advance.

console.jpg

rabbitreborn · 08-05-2016, 10:18 AM

I have done a few of these and I always stuck with the 6" speakers.

That being said, I personally HATE this dash. You have to carve a lot of the factory dash apart to install these and securing the radio head unit is a pain in the backside.

wolly · 08-05-2016, 11:00 AM

When you say carve it away, is it anything that a sawzall will not take care of?
Does it have a good enough seal to make the speakers sound decent?

rabbitreborn · 08-05-2016, 02:49 PM

you have to carve from almost glove box to glove box on it and yes, a sawzall will make most of the cuts.

Personally I didn't enjoy the sound. I think there are better options out there that don't require you to destroy the cart.

08-04-2016, 09:39 PM	#1
wolly Not Yet Wild Join Date: Aug 2016 Location: Charleston, SC Posts: 13	EZGO elite dash Im looking into buying one of those prefab elite dashes for an EZGO TXT with the speaker holes and stereo holes pre-cut. The dimensions it gives for the speakers are 6 inches. I was wondering if anyone has had any experience with these dashes and if so, will a 6.5" speaker be able to fit in there or is there no room for a bigger size. Whats the best place to shop for speakers? Thanks in advance. console.jpg

08-05-2016, 10:18 AM	#2
rabbitreborn Gone Wild Join Date: Jun 2010 Location: Central Florida Posts: 2,757	Re: EZGO elite dash I have done a few of these and I always stuck with the 6" speakers. That being said, I personally HATE this dash. You have to carve a lot of the factory dash apart to install these and securing the radio head unit is a pain in the backside.

08-05-2016, 11:00 AM	#3
wolly Not Yet Wild Join Date: Aug 2016 Location: Charleston, SC Posts: 13	Re: EZGO elite dash When you say carve it away, is it anything that a sawzall will not take care of? Does it have a good enough seal to make the speakers sound decent?

08-05-2016, 02:49 PM	#4
rabbitreborn Gone Wild Join Date: Jun 2010 Location: Central Florida Posts: 2,757	Re: EZGO elite dash you have to carve from almost glove box to glove box on it and yes, a sawzall will make most of the cuts. Personally I didn't enjoy the sound. I think there are better options out there that don't require you to destroy the cart.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Precedent elite dash	Electric Club Car
FS Elite Precedent Dash	Golf Carts and Parts
Elite dash radio static	Electric Club Car
who has the 'ELITE' dash?	Electric EZGO
Precedent Elite dash install	Electric Club Car