12v KSI

scottyb · 12-14-2018, 03:36 PM

Customer reports his 2017 YDRE powers up the R/T switch from the 12v voltage reducer providing 12v to the controller logic board. I do not have this diagram. Can anybody verify this?
The Alltrax XCT is not responding to 12v.
I believe 16v or 24v is the default XCT setting?

Is there any reason not to feed 48v to the R/T switch like the previous years YDRE, G22, G16, CC, and EZ ?

scottyb · 12-14-2018, 04:49 PM

Looks like power is needed at pins 8,10,12,and 13 with the cart in forward and the pedal slightly depressed.

12-14-2018, 03:36 PM	#1
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,859	12v KSI Customer reports his 2017 YDRE powers up the R/T switch from the 12v voltage reducer providing 12v to the controller logic board. I do not have this diagram. Can anybody verify this? The Alltrax XCT is not responding to 12v. I believe 16v or 24v is the default XCT setting? Is there any reason not to feed 48v to the R/T switch like the previous years YDRE, G22, G16, CC, and EZ ?

12-14-2018, 04:49 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,859	Re: 12v KSI Looks like power is needed at pins 8,10,12,and 13 with the cart in forward and the pedal slightly depressed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum