|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-24-2012, 06:52 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2012
Posts: 5
|
96 ezgo won't go
I am new to this and my cart just quit going
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-24-2012, 08:30 PM
|
#2 |
|
Gone Wild
Join Date: Apr 2012
Location: South Louisiana
Posts: 488
|
Re: 96 ezgo won't go
If you add complete details of your cart and exactly what happened, and go fully charge your batteries , and be prepared to answer questions about your fully charged batteries, and have a DVM handy. You will get your cart running.
More info needed, and welcome. ;) |
|
|
|
|
05-24-2012, 08:47 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2012
Posts: 5
|
Re: 96 ezgo won't go
It is a 96 ezgo with selector switch by your knee. The batteries are showing 37.2 volts. Each batt is showing 6.20 to 6.23 per each. Was riding the cart at camp deer hunting and it just quit. It has a 400 Dcx controller now. When you turn on key the solenoid klicks and the controller flashes 4 times and when you hit the gas it goes to a amber color. With key off I have 31.7 volts across Solenoid, with key on I have .010 across big lugs and nothing changes when I press gas
|
|
|
|
|
05-24-2012, 09:22 PM
|
#4 |
|
Not Yet Wild
Join Date: May 2012
Posts: 46
|
Re: 96 ezgo won't go
goin by the chart i got from scottyb, the batteries are at a 70% charge. im still new at this stuff as well but if you have a ? there are a bunch of really nice people here that know there stuff and can help out.
|
|
|
|
|
05-24-2012, 09:57 PM
|
#5 |
|
Not Yet Wild
Join Date: May 2012
Posts: 5
|
Re: 96 ezgo won't go
I really appreciate it. I just took cover of of the back where I could get to the motor and it is hot like you can't keep your hand on it. The key was on for about 30 min should the motor be getting hot without running? I have not had reverse for over a year but I can swap the wires and it would move backwards but then with them that way no forward. Who needs reverse anyway.
|
|
|
|
|
05-25-2012, 06:13 AM
|
#6 |
|
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
Re: 96 ezgo won't go
Have you load tested each battery? Check for loose cables?
|
|
|
|
|
05-25-2012, 06:32 AM
|
#7 |
|
Not Yet Wild
Join Date: May 2012
Posts: 5
|
Re: 96 ezgo won't go
I have not load tested each battery but I have checked all cables and they are all tight. Batteries are around a year old. I wish I could find another one of the trouble shooting guides I had seen that told you if your cart does this then go to here if not go to here. It was very helpful. I should have printed it off and I don't remember what site I found it on.
|
|
|
|
|
05-25-2012, 06:44 AM
|
#8 |
|
Gone Wild
Join Date: Apr 2012
Location: South Louisiana
Posts: 488
|
Re: 96 ezgo won't go
It's in the stickies above. Look at the service manual one.
|
|
|
|
|
05-25-2012, 06:46 AM
|
#9 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,425
|
Re: 96 ezgo won't go
Welcome to BGW
here's the DCS trouble shooting guide start here, sounds like you have a Bad controller and and a stuck solenoid http://www.buggiesgonewild.com/elect...eshooting.html |
|
|
|
|
05-27-2012, 04:21 PM
|
#10 |
|
Not Yet Wild
Join Date: May 2012
Posts: 5
|
Re: 96 ezgo won't go
While doing these test on trouble shooting with the key on and run tow switch in run position the motor is getting so hot you can't leave your hand on it. Is it supposed to be getting that hot when the cart won't move! The key has been on for about 30 to 45 min.
|
|
|
|
Linear Mode
