I40L Ecoxgear Speaker Bar

[GatorOK]

Originally Posted by joshwarden

I finally had free time today to wire mine up. I went ahead and bought a second voltage reducer as well as another fuse block. I'm pretty sure I bought the same voltage reducer that is pictured in the post above. The wiring for the voltage reducer is relatively easy. The only curveball they give is you have to run the green wire to a switched 36 or 48 volt source so the reducer will turn on and off with the key. If you take the cup holder panel off (it just clips in) you will find 3 wires (2 red and 1 brown) that are not being used and I'm assuming are just there for additional accessories. I spliced into one of those red wires. I was reading 36 volts off of it. Worked like a charm! My soundbar had in inline 15 Amp fuse that I had to cut off to feed my wires where I wanted them. Like I say I bought an additional fuse block so this wasn't a big deal. I do feel better having the second reducer. At some point we will probably add some ground lighting and possibly another speaker. I will definitely have plenty of amps to work with bow and won't have to rewire anything, just add to it. I can send pics of you want. Just let me know!

Please include pics and how you hung the speaker. Also wired inside or outside tubing?

[ATrain]

@gatorok I'll post a video/pictures sometime this week or tomorrow, depending on the new year.

[ATrain]

Originally Posted by GatorOK

Please include pics and how you hung the speaker. Also wired inside or outside tubing?

Here's how I did it.

https://photos.app.goo.gl/3z4gRcQuXZmFtynV9

[carguy1985]

Originally Posted by ATrain

Here's how I did it.

https://photos.app.goo.gl/3z4gRcQuXZmFtynV9

I did the same thing except i did split loom and on the inside edge.

[carguy1985]

Here is my setup.

[Conner_poe]

How do I add two 6.5 speakers to to the Ecoxgear soundbar? I would like a three speaker system. All would be sourced by an iphone.