|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
|
|
07-24-2007, 10:08 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2007
Posts: 45
|
Removing body from 02 EZGO
How do you remove body to paint ? Where are all the rivits ? I really want to paint ! Thanks, Milo
|
|
|
|
07-24-2007, 10:31 PM
|
#2 |
|
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: Removing body from 02 EZGO
I'm not sure about the rear body. But on the front one, you'll need to drill all the rivets from the dash panel, and there are also two (1 on each side) behind the rocker covers.
|
|
|
|
|
07-25-2007, 05:01 AM
|
#3 |
|
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
Re: Removing body from 02 EZGO
Front Cowl;
Remove rivets across the top instrument panel, plus two rivets on the bottom of cowl. remove the name plate and there will be two more rivets and it should come off Back body; pull up the mat and there is rivets across the floor remove them,then remove two rivets on each side under rocker panels, remove screws holding on the bumber, and on the side of the bumper there should be two more rivets on the bumper to the frame, also remove the seat brackets they also hold on the body. |
|
|
|
Hybrid Mode