|
|
|
01-06-2020, 08:32 AM
|
#1 |
|
Gone Wild
Join Date: Dec 2010
Posts: 627
|
Hall Effect sensor
Anyone tell me how to wire around the Hall effect sensor on the accerlator on a Tomberlin Emerge elect Thanks
|
|
|
|
01-06-2020, 09:32 AM
|
#2 |
|
Not Yet Wild
Join Date: May 2017
Location: Carlisle, PA
Posts: 47
|
Re: Hall Effect sensor
I dont believe that there is a way. If memory serves, Tomberlin uses a 48v direct input to its throttle which has a circuit board in it. This board splits the voltage and sends 15v to the "hall effect/ ITS" and 48v to the microswitch (i think). Normally an ITS output is anywhere between .5v to 2.5v depending on where the throttle is. This same circuit board then changes that ITS signal and converts it to a 0-5v signal that the control can read. Hope this helps.
|
|
|
|
|
01-07-2020, 10:19 AM
|
#3 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,036
|
Re: Hall Effect sensor
If you have a tomberlin that has the circuit board, you can convert it over to the new style hall effect sensor that does not use the circuit board. All you have to do is swap the 2 outside wires on the plug in to the sensor. Its simple to do.
|
|
|
|
|
01-07-2020, 05:07 PM
|
#4 |
|
Gone Wild
Join Date: Dec 2010
Posts: 627
|
Re: Hall Effect sensor
Thanks Thats what Have
|
|
|
|
|
02-22-2020, 04:56 PM
|
#5 |
|
Not Yet Wild
Join Date: Feb 2020
Location: Granbury TX
Posts: 1
|
Re: Hall Effect sensor
I am changing the Hall Effect on my 2010 Emerge. Which wires go where? Converting from circuit board to new style. Thanks in advance.
|
|
|
|
|
02-22-2020, 05:11 PM
|
#6 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,036
|
Re: Hall Effect sensor
swap the 2 outside wires
|
|
|
|
|
11-16-2022, 06:06 PM
|
#7 |
|
Not Yet Wild
Join Date: Jul 2022
Posts: 3
|
Re: Hall Effect sensor
you can simply turn the plug upside down and insert it into the new hall sensor. it accomplishes the same thing and it works.
|
|
|
|
|
04-20-2023, 12:41 PM
|
#8 |
|
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,325
|
Re: Hall Effect sensor
Here's a link to instructions with pictures on swapping the old circuit board style to the newer sensor with the integrator board. It's a free download.
https://evtechnicalservices.com/onli...ule-cvg1008284 |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Precharger and Shunt or Hall Sensor Help | All things Lithium | |||
| Hall effect sensor | Tomberlin | |||
| 06 Tomberlin Emerge Hall Effect Sensor | Tomberlin | |||
Hybrid Mode