lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-09-2017, 01:55 PM   #1
Papas 73Dart
Getting Wild
Yamaha
 
Join Date: Oct 2016
Location: Gleniffer Lake Resort ALBERTA Canada
Posts: 107
Default 1999 Clubcar DS motor instal

I pulled ot a 48 volt motor from this cart because it was building up bad vibration and made noise when going above 4 mph.It also would slow down like the batteries were dieing then if you hit a bump it would pick up again.
What I found inside was lots of carbon dust and a nose bearing that felt dry with a bit of play.l have replaced the bearing and checked the rotor assembly all is good and the brushes are like new.
My question is what type of lubricant should l use on the output splines ,and the was no bumper inside the output shaft does it require on to help eliminate vibrations
I went on the Clubcar web site and couldn't locate this particular information
Papas 73Dart is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Precedent stereo instal Electric Club Car
Stereo instal Electric Club Car
instal clone motor Gas Yamaha
Should I instal a govenor? Gas Harley Davidson
1999 48V clubcar Electric Club Car


All times are GMT -5. The time now is 12:42 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.