|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-05-2009, 10:51 PM | #1 |
Not Yet Wild
Join Date: May 2009
Location: Home of Elvis
Posts: 13
|
Why is there no compression unless
Why is there no compression with the valves set? I have 165LBS if I loosen the exhaust rocker arm completely and none if I loosen the intake and exhaust. I think I bought a lemon.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-05-2009, 11:10 PM | #2 |
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Why is there no compression unless
|
05-05-2009, 11:13 PM | #3 |
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: Why is there no compression unless
that sounds strange....... Need more info....year of cart, type motor, how much gap in valves etc......
|
05-05-2009, 11:39 PM | #4 |
Not Yet Wild
Join Date: May 2009
Location: Home of Elvis
Posts: 13
|
Re: Why is there no compression unless
It an ezgo 350 out of a 2001 workhorse.
|
05-05-2009, 11:40 PM | #5 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Why is there no compression unless
|
05-05-2009, 11:42 PM | #6 |
Gone Wild
Join Date: Feb 2009
Location: P-COLA
Posts: 1,176
|
Re: Why is there no compression unless
If you loosen both valves all the way,,, you won't have compression... It has to draw air to get compression.
|
05-05-2009, 11:42 PM | #7 |
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Why is there no compression unless
|
05-07-2009, 12:34 PM | #8 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Why is there no compression unless
Motor spinning backwards?
Set the valve air gap first. Follow the valves for proper rotation. Piston rotates down as intake opens then closes, piston rotates up to compression, ignition and down on power stroke, piston rotates back up as exhaust opens and closes, starts over. |
05-08-2009, 08:46 AM | #9 |
Not Yet Wild
Join Date: May 2009
Location: Home of Elvis
Posts: 13
|
Re: Why is there no compression unless
I took the engine out yesterday and checked the timing marks on the cam, crank and balancer shaft. They are correct. I tried to readjust the valves with no improvement. If the rocker arm even touches the intake valve- compression comes out. There is about 165lbs if I dont set the intake vave. With the intake valve set I have none. Let me know if you have anything else to check. The clutch turns counter clockwise. is there any chance it could go the other way? Help!
|
05-08-2009, 09:39 AM | #10 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Why is there no compression unless
The only thing I can think of is that the gear on the crank or balancer has slipped or spun some, it's a press fit gear and it does happen from time to time. This will make the valve timing off
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G-2 compression | Gas Yamaha | |||
low compression fix | Gas EZGO | |||
g1 compression | Gas Yamaha | |||
No Compression | Gas EZGO | |||
compression | Gas EZGO |