lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-02-2012, 11:37 AM   #1
palmerc
Not Yet Wild
 
Join Date: Sep 2012
Posts: 3
Default G16 governor cable issue??

Ok, new to carts, just picked up a '98 gas G16 and it runs fine but I was looking at modifying the governor and found the cable coming from it is unattached...

The cart still runs, wondering where this cable goes to? It looks as if it runs towards the motor and has a fitting on end that looks like it would go to something??
sorry if this sounds ridiculous
palmerc is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Shift Cable or F&R Cable Adjustment Gas Yamaha
Governor issue Gas EZGO
G16 Cart Not shifting Governor / clutch issue Gas Yamaha
Engine racing/adjust governor rod/cable?? Gas Club Car
88 ezgo governor cable Gas EZGO


All times are GMT -5. The time now is 03:01 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.