instal clone motor

Phil Cook · 09-27-2012, 07:53 PM

iam putting a 18 horse duramax in a yamaha replacing a g2 need info on mouting front motormount

Honorstick · 09-27-2012, 07:59 PM

If you go to the big block section I think you'll find all the infor you need.

TheNewGuy · 09-28-2012, 08:05 AM

Quote:

Originally Posted by Honorstick

If you go to the big block section I think you'll find all the infor you need.

Yep! >>http://www.buggiesgonewild.com/clone-engine-swaps/

sho305 · 09-28-2012, 06:07 PM

I've done two of them trying to finish the second one right now. I used two bars of steel like 2x3/8" around 11" long and a tube across the front to hang it lower and level the engine. I made a short angle to make the rear wider to fit the bars. Pics are in my posts. I think the first one is here in yamaha. I used the stock gen on its mount, used both front and rear stock mounts. Got them level and welded the bars in on an angle (made by the tube on the front). That was the easy part lol.

09-27-2012, 07:53 PM	#1
Phil Cook Not Yet Wild Join Date: Sep 2012 Posts: 3	instal clone motor iam putting a 18 horse duramax in a yamaha replacing a g2 need info on mouting front motormount
Phil Cook Not Yet Wild Join Date: Sep 2012 Posts: 3

09-27-2012, 07:59 PM	#2
Honorstick Gone Wild Still Learnin Join Date: Apr 2012 Location: Northern Michigan Posts: 841	Re: instal clone motor If you go to the big block section I think you'll find all the infor you need.

09-28-2012, 06:07 PM	#4
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,371	Re: instal clone motor I've done two of them trying to finish the second one right now. I used two bars of steel like 2x3/8" around 11" long and a tube across the front to hang it lower and level the engine. I made a short angle to make the rear wider to fit the bars. Pics are in my posts. I think the first one is here in yamaha. I used the stock gen on its mount, used both front and rear stock mounts. Got them level and welded the bars in on an angle (made by the tube on the front). That was the easy part lol.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Additional motor on EZGO clone	Extreme DC!
clone motor clutch help	Clone Engine Swaps
Clone motor	Clone Engine Swaps
jetting on clone motor	Clone Engine Swaps
Should I instal a govenor?	Gas Harley Davidson

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum