04-19-2015, 08:56 AM | #1 |
Not Yet Wild
Join Date: Jan 2012
Posts: 56
|
Help with 86 Marathon
Hey guys,pulled the motor to replace crank seals.Put it back together and it will not smooth out.With the cart on jack stands it revs up but sounds like s&&%.Missing out is what it sounds like.I marked the crank and put everything back as it was.I did put a new carb on,but that isn't it as I put the old one back on and it still won't run as it should.Could I have put something back wrong? Does this sound familiar?I know this isn't much to go on but any ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-19-2015, 09:00 AM | #2 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Help with 86 Marathon
Did you do anything else besides the seals? What all did you take apart? Check for air leaks between the carb and block.
|
04-19-2015, 06:00 PM | #3 |
Not Yet Wild
Join Date: Jan 2012
Posts: 56
|
Re: Help with 86 Marathon
Checked for air leaks.All that came off was stator,flywheel and clutch.Also ran the same with both carbs but no leaks.
Last edited by hillcountrymac; 04-19-2015 at 06:01 PM.. Reason: add more |
04-19-2015, 06:02 PM | #4 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,495
|
Re: Help with 86 Marathon
Did you pull the fuel pump apart to check the diaphragms?
|
04-19-2015, 06:02 PM | #5 |
Not Yet Wild
Join Date: Jan 2012
Posts: 56
|
Re: Help with 86 Marathon
Also took off all electrics,you know starter gen stuff.Don't think is electrical.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
marathon to txt swap exhaust question+marathon steering+snorkle | Clone Engine Swaps | |||
88 marathon carb on 84 marathon | Gas EZGO |