84 Marathon Driven Clutch rebuild?

[Blood River1]

After several attempts and lots of reading, I'm un able to find much about rebuilding these. Is it even possible? The reason I ask is because the clutch was not working at all. The only thing I seen wrong was a large platic washer was in a bind and had dropped down around the spring on one side. Any help would be appreciated.

[Blood River1]

Nothing? I've taken the clutch apart and got that platic washer off of that spring and where it's suppose to go. Guess I will put it back together and re install and see what happens. May be buying a new one I reckon.

[Slamminsam]

how were the phenolic buttons on the cam/helix? my sheaves were grooved bad, and the buttons were junk. I machined the sheaves to clean up the grooves, new buttons, new 28 degreee cam. i think i changed the spring hole location too. i didn't feel like all of that helped much. my next move is a new clutch, i think. i took alot(too much) of material off by cleaning up the grooves in the sheaves.

[Blood River1]

The buttons look fine to me and the sheeve's look to have normal wear on them to me. Nothing grooved and a pretty smooth surface. I'm just gonna re assemble and slap it on and see what happens.