|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-05-2016, 04:16 AM | #21 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: %^*@# ezgo hub !!!!
Never tried this, someone sent me an email about about it
Make your own penetrating oil - that's better than KROIL? atf / acetone mix! "The April/May 2007 edition of Machinist's Workshop did a test of > penetrating oils where they measured the force required to loosen > rusty test devices. Buy the issue if you want to see how they did > the test. The results reported were interesting. The lower the > number of pounds the better. Mighty interesting results for simple > acetone and tranny fluid! > Penetrating oil . Average load .. Price per fluid ounce > None .................. 516 pounds . > WD-40 .............. 238 pounds ... $0.25 > PB Blaster ......... 214 pounds .. $0.35 > Liquid Wrench ... 127 pounds .. $0.21 > Kano Kroil ........ 106 pounds .. $0.75 > ATF-Acetone mix.. 53 pounds .. $0.10 > The ATF-Acetone mix was a 50/50 mix (1 to 1 ratio)." |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-05-2016, 06:49 AM | #22 |
Guest
Posts: n/a
|
Re: %^*@# ezgo hub !!!!
interesting
|
05-05-2016, 07:04 AM | #23 |
Not Yet Wild
Join Date: Sep 2014
Location: Western NC mountains
Posts: 72
|
Re: %^*@# ezgo hub !!!!
ATF/Acetone works great. Only thing is that you have to use it immediately after mixing. It looses it's effectiveness pretty quickly. Can't be stored.
Jack |
05-05-2016, 07:10 AM | #24 |
Gone Wild
Join Date: Apr 2016
Location: Greenwood, SC
Posts: 1,291
|
Re: %^*@# ezgo hub !!!!
Yep atf/acetone is a good one that's widely know and shared. Just atf alone is ok.
|
05-05-2016, 08:11 AM | #25 |
Gone Wild
Join Date: Sep 2015
Posts: 572
|
Re: %^*@# ezgo hub !!!!
|
05-05-2016, 11:29 AM | #26 |
Guest
Posts: n/a
|
Re: %^*@# ezgo hub !!!!
had an hour to kill at work this morning
cut off the spring retaining pins took screw driver and made sure pads were loose got a new bottle of gas and puller heated it up and pulled .. and pulled ... beat it with BFH nothing reheated it poured cold water on it pulled ... hammered it nothing called on the great spirit in the sky for lighting nothing if i take the axle bolts off can i slide the whole thing out ? |
05-05-2016, 11:30 AM | #27 | |
Guest
Posts: n/a
|
Re: %^*@# ezgo hub !!!!
Quote:
my luck the other side will strip |
|
05-05-2016, 11:57 AM | #28 |
Gone Wild
Join Date: Nov 2009
Location: Picayune, Mississippi
Posts: 881
|
Re: %^*@# ezgo hub !!!!
The last time I did one on a txt I removed the c-clip on the wheel bearing and pulled the axle shaft and hub assembly out as one piece. I then put it in a tristand pipe vise and with a can of Kroil I was able to beat the hub off with a 3 pound hammer.
|
05-05-2016, 12:36 PM | #29 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: %^*@# ezgo hub !!!!
If you are trashing it anyway drill a bunch of holes into the hub around the shaft and fill with your choice of penetrating oil.
|
05-05-2016, 12:41 PM | #30 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: %^*@# ezgo hub !!!!
Is it off yet!?
|