|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-27-2016, 10:59 PM | #1 |
Not Yet Wild
Join Date: Oct 2016
Location: San Diego
Posts: 9
|
New member, few questions
Hello everyone,
I'm a new member here from East San Diego. I'm also an avid fisherman and hunter. While I admire many of the members rides here, and I recently bought 1981 Yamaha G1 Gas last week. I began to get my hands dirty and started working on it. I ordered Jake's 5 inch lift and as soon as I installed the first arm, I realized that the spindle mount larger than Jake's and also the shock mount do not line up with Jake's. Is this normal? What else do I need to do to make this work? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-28-2016, 08:28 AM | #2 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,229
|
Re: New member, few questions
welcome to the addiction , im not a yamaha guy but wanted to welcome you to the site
|
10-28-2016, 10:08 AM | #3 |
Not Yet Wild
Join Date: Oct 2016
Location: San Diego
Posts: 9
|
Re: New member, few questions
|
10-28-2016, 09:28 PM | #4 |
Gone Wild
Join Date: Apr 2011
Location: New Jersey
Posts: 999
|
Re: New member, few questions
Are you sure it is for your year ? Most lift kits for the Yamaha G1 are for 1982 and up !
|
10-28-2016, 10:02 PM | #5 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: New member, few questions
|
11-04-2016, 12:05 AM | #6 |
Not Yet Wild
Join Date: Oct 2016
Location: San Diego
Posts: 9
|
Re: New member, few questions
I recently bought new spindles for my 1981 G1 (converted to 1982 and up spindles) but what supruised me is the 1981 hubs are not fitting the 1982 and up. The inner bearing are too small. Do I need to get new bearings or the whole hub? Can someone point me to the right direction?
|
11-04-2016, 12:46 PM | #7 |
Not Yet Wild
Join Date: Oct 2016
Location: San Diego
Posts: 9
|
Re: New member, few questions
Hard at work but need advices on the front bearing issues
|
11-04-2016, 03:48 PM | #8 |
Gone Wild
Join Date: Apr 2011
Location: New Jersey
Posts: 999
|
Re: New member, few questions
Did you call Jake's and ask them. I have spoken to them before and they were very nice and helpful
|
Tags |
hunting, jake's lift kit |
|
|
Similar Threads | ||||
Thread | Forum | |||
New member Yamaha g16 questions | Gas Yamaha | |||
New member with questions about a textron | Electric EZGO | |||
05 IQ questions for a new BGW member | Electric Club Car | |||
New member, some questions before cart purchase | Electric EZGO |